Don't go over 75 MPH.
The buzzer that lets you know the key is in the ignition in a 1989 Chevy Blazer is in the steering column. To access it you would need to remove the steering wheel with a special tool, or remove the ignition assembly. The key makes contact with a tab that activates the buzzer.
remove fuse-Look in manual for which one
There's a wire under the driver's seat (under the carpet) that goes to the seatbelt, unplugging this will disable the annoying buzzer you have till u put on your seatbelt. An off note on that... The paramedics will also appreciate the lack of noise when they investigate how you died in the accident by not wearing a seatbelt...
There are two ways to deal with the buzzer in your Chevy Celebrity. One way is to remove the buzzer itself, it is in the "convenience center" which is behind the instrument panel to the left of the steering column. It may be a pull down for easier access. The buzzer is in a rectangular can along with the horn relay and the round cans are the signal flasher and emergency flashers. It looks to me like it would be a pain to get too, not particularly convenient. The other way would be to remove the switch that is operated by the ignition key. It is below the turn signal switch in the steering column. To get to it you would remove the steering wheel, then the lock plate, and then the signal switch. Neither option is particularly appealing to me.
My mechanic told me that it is not advisable to disconnect the warning buzzer, as it is on the same network as some of the interior lights. But I feel the same way as you - TOTALLY ANNOYING. Does anybody else have advise on how to get to the buzzer so we can figure out a way to "muffle" the sound at least with electrical tape or something??
you **** a buzzer
To stop the buzzing sound you will need to disconnect the buzzer. It is normally red plastic and located near the steering column at the top of the brake pedal mount.
You may have something riding in the passenger seat causing it to trigger the seat switch.
a piezo sounder is a buzzer, all it needs is an electron flow through it like any other component and then: "hey presto, there's an annoying noise in the room" :)
A buzzer is cool. You just connect the circuit.
take two cells a buzzer and a light join the buzzer with wire and the light bulb with the buzzer and the cell
You can get a joy buzzer at Party City or Spencers