answersLogoWhite

0


Best Answer

depends on the kind of aux on the amp or the lead of the headset

User Avatar

Wiki User

9y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: Can Triton ax 180 headsets plug into mix amps?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How many amps will 2-2-2-4 carry at 180 feet?

150 amps


How many amps are available in a three phase 225 amp panel?

180 amps. Assuming the panel will be loaded only 80%.


How many amps can 4 ought aluminum wire carry?

Aluminum 4/0 wire car carry 180 amps at at 75 degrees Fahrenheit or 205 amps at 90 degrees. .


180 milliamps equals how many amps?

1,000 milliamps = 1 amp 180 milliamps = 0.18 amp


How many amps do you need to supply a 150kva transformer to get 118amps 480 volts?

Rephrase your question, as it doesn't make any sense. If the primary side of the transformer is 480 volts 3 phase, this transformer can be supplied from a breaker as big as 180 amps. If 480 volts 3 phase is your secondary then you can supply up to 180 amps to your loads.


What does battery of 180 AMP HOUR mean to you?

it means battery can deliver 180 amperes per hour if driven at full load I.E, isa an application setup whican draw 180 amps is connected to a battery of 180 Ah it will delivery current till one hour . Chandra sekhar


What is the sum of the measures of the interior angles of a 20 sided polygon?

The formula that I use is (n-2)180 where n=number of sides. Plug in 20 and you get (20-2)180 (18)180 3240 degrees


Where is the radiator drain plug located on a 1999 Saturn?

Radiator drain plug is located on the bottom of the radiator on the passanger side. you may have to remove the lower splash shield to gain full access to the plug. to open the plug turn it 180` and pull out.


What is the formula to figure out how many plugs and lights you can put on a circuit?

This depends upon the circuit breaker capacity. You may never load a circuit to greater than 80% of it's capacity. So you may load up to 12 Amps on a 15 Amp circuit, and, 16 Amps on a 20 Amp circuit. The National Electrical Code requires you to calculate each receptacle at 180 VA. If the circuit is 120 volts and 15 amps, you would have 1800 VA, divide by 180 VA per receptacle, equals 10 receptacles per circuit (minus the wattage of each luminaire or light fixture added to the circuit, before dividing by the 180 VA). If the circuit is 120 volts and 20 amps, you would have 2400 VA, divide by 180 VA per receptacle, equals 13.333 receptacles per circuit (round down to 13 receptacles),(minus the wattage of each luminaire or light fixture added to the circuit, before dividing by the 180 VA).


What is 1.5amps 115 volts equal to in watts?

There really is no fixed answer. Amps are a measure of current, while watts are a measure of work. To get the answer, you need to know either how many volts you are dealing with, or how much resistance; the relationship is W= V*I (where I is the current in amps). That said, for a typical 120 volt household current, the number of watts would be 180.


How much power does a DC to AC inverter use when not used?

One 150 watt inverter reports 0.2 Amps (=approx 2.4watts) Another inverter (180 watts?) reported 0.4 Amps If you find a fairly complete spec sheet, it may tell you the Amps or Watts that it uses under "No Load". I'm the originator of the question, and I discovered the "additional" specs.


How many watts are in 3 amps?

The conversion of watts to amps at a fixed voltage is governed by the equation Amps = Watts/Volts for example 12 watts/12 volts = 1 amp for a US example, a food mixer with a 400 watt motor on a 120 volt supply 400/120 = 3.33amps, fit a 5amp fuse