Yes, if it is hit by another raw diamond or struck with an incredibly powerful industrial laser.
You can cut a diamond with a laser -- because of its value, you might not want to 'break' it.
Anything can 'break' a diamond should it strike the diamond in its weak spot -- a flaw, because a diamond has perfect cleavage in four directions.
With the application of sufficient force, yes, a diamond can break. Diamond cutters do it all the time. They actually use a hardened steel chisel and a hammer to cleave diamond. Certainly a diamond can be broken using a hammer and an anvil, but that is a poor use of the tools and a waste of a diamond.
Hitting a diamond is probably not an activity that will produce much of a result, if your goal is to 'break' the diamond. If you purchase a diamond large enough to be a target to hit, you'll spend tens of thousands of dollars, perhaps more. Diamond is the hardest natural mineral known
Yes. Although diamond is very hard, it is also brittle. Hit a diamond with a hammer, and it WILL scratch the hammer- but the hammer will also shatter the diamond.
A diamond is the hardest mineral on earth and your finger nail would break in half before you got enough pressure on a diamond to put a crack in it. Much less break it.
The proper words are raw diamond, raw stone, rough diamond, uncut diamond -- all are appropriate.
The field test for raw diamond is 'extreme hardness'.
Your question is about a raw diamond. A raw diamond must be evaluated for its natural colour and clarity. Then you can work with a diamond cutter to estimate the value of a cut diamond that can be 'rescued' from the raw diamond. The diamond cutter may offer to purchase the raw stone, or work out another arrangement with you for its ultimate value. Typically more than 50% of the carat weight of a raw diamond is lost during the cutting process.
You're asking about a raw diamond, one that has not been cut or polished. In context, sometimes a raw diamond's "... eight corners are truncated by the eight faces of the octahedron." This is one description of a diamond's raw, crystalline form. You can read more about the geometric descriptions of raw diamonds, below.
The raw diamond of 19.5 carats weighs about 3900 milligrams. Remember, though that raw, gem-quality diamonds can lose about 60% of their weight when cut and polished.
A raw diamond looks like two square pyramids attached at the base.
Diamond cutters fracture raw diamond stones using diamond cutters, lasers and hammers. Diamonds can fracture along flaws. Large, rough diamonds are fashioned and cut this way. Once a diamond is cut to reveal its highly prized features, such as clarity, colour and carat weight, however, it becomes a valuable commodity, so you probably wouldn't want to 'break' one, just to learn how.
The largest raw diamond found to date is the Cullinan Diamond, found in South Africa in 1905. It weighed over 3,000 carats.
how i break pinfall in raw total edition
Calories in a half of a raw red pepperThere are:Approx 18.5calories in half of an average size raw red pepperApprox 25.5calories in half of a large size raw red pepper.
Yes, diamond is a raw material and is located deep within the earth's mantel.