Sanding should take place (220 grit to 320 grit), they are both solvent based and should work together. Answer YOU SHOULD NOT BECAUSE IT WILL PEEL. YOU NEED TO SAND THE OIL BASE SURFACE FIRST.
No lacquer is a solvent base.
not at all!
NO. -It will not stick.
To a degree, but if you are concerned use lacquer thinner.
Be careful applying lacquer as a top coat over latex or water based paint. The paint will often "craze" (bubble or sag) when lacquer is applied to it.
Generally speaking, you don't brush lacquer....it has to be sprayed. With that being said there are probably some products that you can brush on if you feel that you must. You would want to use either a china bristle brush, or a "natural" brush. Please know that when you use lacquer thinner to clean your brushes, it may soften the glue that bonds the bristles to the handle. I would use a polyurethane or urethane if you need to apply it by brush. You can put either on top of lacquer if you want to (but you cannot put a lacquer on top of the poly).
No, most plastics will soften and wrinkle.
No, the solvents in lacquer are to hot and volatile. The lacquer will cause bubbling of the acrylic paint.
NO. -It will not stick.
No, the solvents in lacquer are to hot and volatile. The lacquer will cause bubbling of the acrylic paint.
To a degree, but if you are concerned use lacquer thinner.
Yes. Proper prep is requiered. Sand. seal. ect...
Yes. But you can't do the reverse. So if your primer is lacquer-based you can spray an over-coat of enamel on the top.
yes, mixture of 1/2 clear lacquer and 1/2 lacquer thinner. You can also use polyurethene spray
Be careful applying lacquer as a top coat over latex or water based paint. The paint will often "craze" (bubble or sag) when lacquer is applied to it.
Use heated lacquer remover.
Yes, it is .
I would use a high quality Lacquer, with high solids, (high gloss, water clear) I use Hood Lacquer.
Lacquer paint is popular for nails.