No, you'll need to put a pipe adapter on the PVC, then use a standard PEX crimp fitting. Or you can use a SharkBite fitting. They work well for this.
If you re-piped your domestic supply with glued PVC pipe it will take a few weeks of use. - You should have used PEX !
There is no special PVC pipe. CPVC can be used for hot water applications or in my opinion just use PEX pipe.
It depends on where you are application and local code. Copper tube, Pex, PVC, CPVC, & Polyethylene are all used.
its glue spicily for pvc pipe only
I don't understand why you'd want to do that . CPVC glue is expensive, PVC glue is cheap and glues PVC pipe better.
if your waste pipe is PVC and your glue is for PVC . yes! but make sure to use a primer(cleaner) on the pipe first.
PVC can take hot water like any other pipe but the reason no one wants to use it on hot water lines is because the glue joints can not take hot water so if your talking about straight pipe then it will be ale to take 212 degrees but if your talking about pipe and glue joints then it will fail around 65 + degrees F . If you want to run hot water in PVC you can use CPVC and the glue joints an pipe can with strand 212 degrees F but after some years as I have seen the pipe gets real brittle and so i always recommend the best called Wirsbo or any class AA pex
NO, PVC is very sensitive to which glue is used. In Domestic pipe applications you should use Weld-On 711
Abs to PVC glue sold at home depot Color it aqua blue/green plumbers key term. GUMBY GLUE Depends upon what you mean by "black pipe". If you mean ABS drain pipe, there is glue for that. If you mean steel "black pipe", i.e., non-galvanized, then you would need a threaded connection adapted to the PVC (either a female PVC connector on a male black pipe or a male PVC connector into a female black pipe fitting). The secondary question would be, "Why would anyone want do to that?"
ABS yellow glue is the correct glue for ABS pipe. The only other glue to consider is Weld On Transition cement if you are gluing ABS to PVC parts.
A PVC pipe glue will take at least 4 hours to dry. 12 hours before putting water pressure in it.
Yes, you can. You need PVC glue though - 711 is best