No reason why not - simply run the machine 'empty' (with no washing in) - and follow the instructions on the packaging. It's a good idea - especially if you're in a 'hard water' area. Performing periodic cleaning of an empty machine will prolong its life.
It depends on where it is dripping. The spinning cycle of the machine might be causing the pipes to loosen up. You might want to check out the pipes if they are loose.
Washing machines are connected to your mains water supply so either there is a problem with your water supply in as much as it is continually leaking when it's not supposed to be in use, or, more likely, there is a blockage in the machine or the water pipes immediately surrounding it which is causing water to flood back out of the machine. It's usually a small item of clothing like a sock (or a collection of them) that has worked its way out of the machine via that gap at the front of the drum just next to the door, and is now blocking your pipes. You may find water bubbling back out of your sinks and bath, depending on their proximity to the washing machine. You need a plumber, quick!
Iron rusts easily when combined with water, and drain pipes have water flowing through them. If iron was used, the pipes would rust within a few days.
galvanized water lines, cast iron drain lines, sometimes lead pipes, terracotta or clay pipes, and in rare cases wooden pipes.
Could be a drain for the inducer motor if it has one and it depends do you have a a/c coil on your furnace if so it could be a drain for it.
You must mean in DRAIN pipes. -It can not be used in plumbing pipes.
Raise the room temperature, or place a hot water bottle inside the machine, and allow the ice to melt in the pipes. Hopefully, the plastic pipes will take the expansion from the ice and not spring a leak.
See if there is something stuck in the pipes that is clogging it up and causing this to happen.
Backflow from the sewer or drain pipes.
It is actually required in model codes as it preheats the water to the machine
Sounds to me like you have a clog in one of your pipes. This causes water from the washing machine to drain into other pipes instead of going down the main line properly. Check the bathtub when the washing machine is draining... they're notorious for filling with old yicky washing machine water! The clog can possibly be in a line ion the house, or possibly be caused by roots in the main line. Sounds like it's time to hire a plumber! Good luck!!
It depends on which part it is leaking. It might be a loose drain pipe. when it spins, the motion loosens the pipes. Check the origin of the leak and try to tighten the pipes. You can always refer to http://www.washingmachineadvisor.com if you have not solved your problem yet.
It depends on where it is dripping. The spinning cycle of the machine might be causing the pipes to loosen up. You might want to check out the pipes if they are loose.
Tubular parts are found in a variety of different objects. They are common in drain products, so may be found connected to appliances such as your washing machine. Other examples are for things such as exhaust pipes and handle bars.
It doesn't pump the water in, where the hoses attach to the washing machine is a valve that opens and lets the water in. The pressure in the line forces the water in the same way it does when you turn on a faucet.
It would burn out the pump motor after a while. I don't recommend doing it.
Most drain pipes are made of copper