How electricity convert into heat from an electric geyser?

Answer 1

Geysers work on a principle of converting electrical energy into the heat energy. There is heating element inside the geyser which gets heated. Cold water gets collected into the geyser tank and gets heated to a certain temperature. There is thermostat device, fitted in the geyser, which cuts off the electric supply to the geyser, once the water inside reaches a certain temperature. It helps conserving the electricity. For the convenience of the users, there are two LED lights are given on the below side of the geyser. Conventionally, these are red and green lights. When the element is heating up, red light is lighted and when the element stops working, green light starting emitting. Emission of green light means the water is hot at the maximum temperature allowed by the geyser. Cold water in the geyser come in through a separate inlet and hot water goes out through a separate outlet.

Answer 2

there are two pipelines one for cold water and the other for outlet of hotwater.the water tank is fitted with heating elements which are controlled by the thermostats.the function of thermostat is to set the temperature to a certain value so that water is not heated above that value.the tank is normally covered with some insulating material such as glass,wood.the entire system is enclosed inside a metal casing which can be hanged on the wall.the sacrificial anode is used to protect the tank from corrosion by sacrificing itself and helps to prolong the life of the tank

Answer 3

An electric geyser is an electric water heater, basically a wire that goes hot when a current is passed through it. When this wire is submerged in water, it'll heat the water.

Electrically, pretty much the same setup as if you'd have a huge light bulb, but filled with water instead of a protective gas.