That is a setting that the dealers' scan tool can turn off and on.
That is a setting that the dealers' scan tool can turn off and on.
That is a setting that the dealers' scan tool can turn off and on.
You have a short circuit in your wiring. You need to take your vehicle to a mechanic to have it fixed before you damage your battery.
check the increase/decrease interior light button, if it is close to being in the complete on position this can happen. Keep in middle setting
Yes! The three blinks indicate the system is armed and all doors are locked. If the lights do not flash, then a door is open. The single light flash upon unlocking tells you the system is disarmed.
It requires a scan tool capable of performing software flashes.
There is a factory service bulletin about your problem. The software in the body computer needs flash updated. That is only available at the dealer.
Low fluid, Trans computer that needs a software flash at the dealer, failing trans, etc
If you are trying to use it while on defrost, that is normal. It is telling you you can't do that. If not then, you have a door malfunction.
Here in Central New York, as of Nov 2012 rthe cost is around $100 just to flash the unit
Be sure the 4-way is turned off.
A lot of these vans had software upgrades for trans shifting issues. The dealer can "flash" new software into the computer.
one of your doors or bonnet not shut we had the same problem but they will only flash on double locking
after installing led lights my 08 dodge 2500 the turn signal lights start flashing slow for 5 or 6 times then speed up to fast . the emergency flasers flash ok . hooking them up i used separate lights for the brakes , they are not hooked in with the turn signals