If it is a new generation hemi (5.7, 6.1) it will come on because these are not flex-fuel vehicles.
YES!!!!!YOU SHOULD NEVER RUN A VEHICLE ON ETHANOL THAT DOES NOT SUPPORT IT (HAS A FlexFuel LOGO ON IT!)THIS WILL CAUSE EXTREME DAMAGE TO YOUR ENGINE!
The bulb is burnt out or has been removed.
The Chrysler Cirrus did not come out until 1995. You reset the check engine light with a scan tool or by unhooking the battery. If you have not repaired the cause of the code the light will come back on.
The check engine light is reset with a scan tool after repairing the cause of the fault.The check engine light is reset with a scan tool after repairing the cause of the fault.
Check engine light on?? Not running on all cylinders?
The service engine soon, or check engine, light is reset with a scan tool after repairing the cause of the trouble codes.
You can clear the code with a scan tool or by unhooking the battery. If the cause is not repaired, the light will return.
You use a scan tool after repairing the cause of the code.
The engine check light on Chrysler town & country come on only when there is problem with any sensor Mal function which set off the engine check light. To reset this indication light read the OBD code and correct the corresponding problem. Once the cause of problem is corrected, than only OBR scanner will reset this service engine light can be reset.
After repairing the cause, you can reset with a scan tool or by unhooking the battery.
There are pages and pages and items that can cause a check engine light. You need to have it checked for codes with a scan tool. After repair light can be shut off with scan tool.
You can unhook the battery or use a scan tool to erase the code. If the cause is not repaired, the light will return.