Unanswered | Answered


Parent Category: Engineering
Being the driving force behind most factory, manufacturing, mining machinery, heavy vehicles and equipment, pneumatics are a vital part of our industry today. The field of pneumatics is vast and knowledge is constantly requested in the workings and troubleshooting thereof.
If you are talking about a pneumatic solenoid valve the function of  it is to control the air in and out flow in a pneumatic actuator.
To pump air. Acutally, there are many things thant can be done with  pressurized air -- even make a computer!
Pneumatic is compressed air, hydraulics is a pressurized liquid.
Pneumatics is a method to transfer energy from one point to another using actuators which which are driven by fluids under pressure. Pneumatics restricts itself to gaseous fluids while hyraulics uses liquids to transfer the energy.   The transferring of energy in pneumatics such as pumping air...
The primary health issues related to pneumatic caissons include: . explosive decompression . excessive pressure . the bends (caisson disease) . hazardous atmospheres . confined spaces
human respiratory uses air pressure like pneumatic system does
Pneumatic systems are systems that operate through the use and control of compressed air.
Yellow Lubrication Oil, Hydrolic Oil    Red Heavy Fuel Oil    Pink Marine Diesel Oil    Blue Fresh Water    Green Sea Water    Black Waste Fluids (Bilge Water, Sludge, Sewage)    Gray Air
What is the Pneumatic Railway
  Pneumatics are good for lots of things. Here is a brief explanation of on one use.   A good example for pneumatics might be a cap gun, where you put put in the caps and pull the trigger. The trigger makes the caps come out. Great pressure is applied to the caps, which gives them great power...
Because air is in constant supply - thus, a leak in the system won't necessarily render the brakes inoperable, whereas, with hydraulic brakes, the fluid would leak out until it had emptied.
Johnson controls makes an amazing solenoid valve for this type of application
A - Compressor: a pump which compresses air, raising it to a higher pressure, and deliversit to the pneumatic system (sometimes, can also be used to generate a vacuum).B - Check valve: one-way valve that allows pressurized air to enter the pneumatic system,but prevents backflow (and loss of pressure...
Training and licensing is required for powder actuated tools but not for air tools. I have sold millions of rounds for powder actuated tools with only 4 injuries, but I know of about a dozen guys who have shot themselves with air tools,still no training required. Check out constructionfastening.com,...
Elements of both but the molten rock pyroclastic flows (Mauna Kea , Hawaii) are hydraulic, the Mt. St Helens eruption was to a large extent pneumatic as the water turned to steam.
Example: A bicycle tire pump uses mechanical energy (your body) and converts it into pneumatic energy (air out of the hose).
The main danger is the pent up power of compressed air. If the tie rods on an air cylinder fail the end would fly off at some terrific speed whereas with an hydraulic cylinder as soon as the end came off the pressure would be gone even though it was much higher to start with.
  A pneumatic spool valve usually has two sets of atleast one but possibly more rubber o-rings which does indeed need lubrication to function properly.
  une huile emulsifiante ( qui se vaporise facilement en fine gouttelette ).
Pneumatic systems rely air pressure to cause something to move. One simple example is the tyres of a car. Air pressure raises the car from the roadway. Dentist drills are pneumatic; electricmotors are too big and heavy. Road drills are pneumatic; they are very simple and more powerful than an...
Neither. Hydrofoils are normally attached to boats and they give them lift off of the water.
The advantages of pneumatics are that it can be used in a variety of applications and can deliver great amounts of power. Among the disadvantages are the costs of the equipment, which may be greater, compared to other power systems. Also, the high pressure air might be dangerous in the event of a...
both, if it pumps liquid then it's hydraulic, if it pumps gas it is pneumatic
it compresses and expands gas so i would say pneumatics but not in the normal sense
what is the color code for all the pipeline used in standard hotel industry
Pneumatics are cheaper but hydraulics are better, though they're are both similar.
The Trerice Pneumatic Controller operates through a coordination of its thermal orpressure sensing system and its air signal relay system. The controller’s sensing bulb orpressure connection, installed within the process application, senses change within themeasured variable and relays this...
Pneumatic means "containing air", so a "pneumatic tire" means just that: a tire which is full of air. Such tires are made of a flexible rubber compound, about the same shape as a big ring doughnut, that has to be made the right size to fit a particular size of wheel rim. The tire must have a one...
No, a pneumatic device is operated by the force of compressed air.
SCUBA tanks are metal (usually steel or aluminum) that are filled with compressed air. This is loosely related to a pneumatic system.
  == Answer ==   A pneumatic thermostat is one that controls the air handling system by using an air-filled control tube to send signals. Pneumatic thermostats typically use a bi-metallic strip that responds to temperature changes, and correspondingly increases or decreases the air pressure...
Pneumatic Load Cells - this is another type of a mechanical load cell. It has a wide weight range and a high accuracy. On the plus side they are intrinsically safe and it contains no fluids but on the downside they have a slow response rate and they need to be cleaned regular with dry air. These...
Pneumatics could be used in a system like at the bank drive-through to shoot the container through the tube, or air powered tools, such as nail guns and drills.
Gas welding basically used for weaker joints(in sheets) and arc welding for stronger one(plates). mobile welding (not in a shop)is the ideal time for arc welding . gas welding is the way to go as far as production is concerned , but requires environment with little air circulation or wind , plus gas...
when high power transmission is involved then hydraulics is the best option this because there are hydraulic fluid available to suit the various pressure levels. liquids have almost zero compressibility.in pneumatic system air is the working fluid, too high pressure could compress the air to such an...
hydraulic is liquid based, pneumatic is air.
it makes the car feel less bumpy.
pneumatics are used only in low power applicationshydraulics are used in medium to high power applications.
when high power transmission is involved then hydraulics is the best option this because there are hydraulic fluid available to suit the various pressure levels. liquids have almost zero compressibility. in pneumatic system air is the working fluid, too high pressure could compress the air to such...
preparation of a 2D or 3D model for analysis of stress concentrations within the small elements. It basically implies assigning material properties, defining boundary and loading conditions in a model
All electronic logic functions can be implemented with pneumatic logic devices which simply operate using compressed air and vent into a cabinet (i.e. there are no problems with oil or fluid leaks). Pneumatic memory has set, reset and output lines like electronic memory. The logic state is...
They're bolt-on components. You'll need an impact wrench, and a  torque wrench to ensure that you torqued the bolts properly (which  is very important, given the function of the landing gear).
The Pneumatic cascading method system is to use the combiintaion or hybrandising the positive extending force and negative retracting force of a double active cylinder using hyrdopneumatic systems or purely pneumatic air system that operate differentiable tool operations by clamping ,shaping ...
Any pressure difference is irrelevant. The distinction is in the operating fluid. In pneumatic systems, it's a gas. In hydraulic systems, it's a liquid.
Pneumatics is the use of pressurized air to effect mechanical motion. Pneumatics is used in a variety of different areas.For example in dentistry applications, pneumatic drills are lighter, faster, and simpler than an electric drill of the same power rating (because the prime component, the...
pneumatic is a medium to control valves, through the tiny tubes{just like electricity through the wires}.....
Filters, regulators and lubricators can be combined to ensure optimum compressed air preparation for a specific pneumatic system.
show inside view of pneumatic jack
the pressure supplied to devices is usually 30 p.s.i. , . but where concerning pressure control signals, the range is 3.0 psi for a zero point on operating scale, to 15 p.s.i. for a maximum span point .
It is a pity you  cannot have drawings in the answers.  To understand  pneumatic leverage, imagine you have two bicycle pumps to pump up  the tires of your bicycle. One has a piston with a surface  area of 4cm2 (square centimeters) and the other has a  piston with a surface area of 8cm2. You...
Pneumatic hooter is basically for audible alarm in hazardous area location, being used with intrinsically safe alarm annunciators.
As far as I know, according to the volume of oil absorption and realize the function of oil to points, the hydraulic pumps can be can be divided into gear pump, vane pump, plunger pump and viscosity pump.
A steam hose is a hose used for moving and directing steam.
I have a central pneumatic air compressor about 2 years old has not been used much at all the problem is the motor turns of before the tank has field stops about 40 pounds and you have to reset the motor 2 or 3 times before it is up to pressure have rewired the plug to make sure it is getting the...
Regulations   Health and Safety at Work Act (1974) H&SAW A general piece of legislation used by the Health & Safety Executive to prosecute organisation for failing to comply with Regulations & EC Directives Provision and Use of Work Equipment Regulations (1998) PUWER Cover the 'in...
Hydraulic cylinders can be tested dynamically by connecting the test cylinder with a master cylinder mounted within a rigid frame structure. Usually the test cylinder isoperated with a hydraulic power source and the master cylinder is loaded with reliefand check valves connected to the ports.Such...
Machines of all types need power. Power allows the machines to do specific kinds of work. Two of the most efficient and compact forms of power for machines are hydraulic and pneumatic systems. Hydraulics and pneumatics can be configured into different types of power sources to lift, lower, pull,...
a jackhammer uses a pneumatic system.the jackhammer is a direct combination of a hammer and a chisel
pneaumatic transmiter
A risk assessment is nothing more than a careful examination of  what, in your work, could cause harm to people, so that you can  weigh up whether you have taken enough precautions or should do  more to prevent harm. The aim is to make sure that no one gets hurt  or becomes ill. Accidents and...
The process of find fault in the electro-pneumatic and hydraulic  system is called troubleshooting. The process involves the use of  the multi-meter to check if the internal parts are okay.
On 7th December 1888, John Dunlop invented the air-filled or pneumatic tires for his son and tested it in Cherryvale sports ground, South Belfast, Northern Ireland. A pneumatic tire is made of reinforced rubber and filled with compressed air; used on motor vehicles and bicycles etc. Pneumatic tires...
it is a bike operated by air
The adjective 'pneumatic' means of or pertaining to air, gases, or wind; filled or inflated with air or gas.
A example of a pneumatic system is a pump for a bicycle tire.
Among other reasons, oil is a natural lubricant, it doesn't evaporate readily, and it doesn't support corrosion. Oil has a much larger temperature range in which it stays a liquid.
pnuematic and control principles
Pneumatic handtools operate by forcing compressed air through rotor blades. They are lightweight, durable, high performance tools used in demanding industrial applications
Examples of pneumatic products include: drills, grinders (metalworking machinery), pneumatic chip removal guns, hammers, ratchet wrenches, and sanders.
yes, the pump is what pressurizes the canisters, without any pressure nothing would move
It is to compare the two different inputs
Yes, but technically, only if the propellant is air.
They smooth out bumps on the road. Let all the air out of your bicycle tyres and then ride it if you don't belive it.
Hydraulics are used in many application from your brakes in your car to large industrial machines. Hydraulics refers to a fluid system mainly used to generate a motion like controling a hydraulic cylinder (ram) or hydraulic motor. This system normally run on a type of oil.
  Antibiotics such as streptomycin or tetracycline drugs are given, and symptoms are treated. There is also a vaccination available for people working in or traveling to plague-affected areas of the world.
Hydraulics use liquids as the working fluid, pneumatics use gases as the working fluid.
Depends entirely on what you're doing. If it's light weight work - Doors and the likes, pneumatics. If it's heavy duty work - JCB and construction, hydraulics.
After numbing the eye with a local anesthesia, the surgeon injects a small gas bubble into the inside of the eye. The bubble presses against the retina, flattening it against the back wall of the eye.
Can only assume the question was "why do you use compressors for pneumatics?"...But if not, ignore this. If you didn't use a compressor, your circuit wouldn't do anything, the air would but incapable of pushing the cylinders, opening valves or doing anything.
Benefits. Speed​​. Extension system. Simplicity of the system. Cheapness and abundance of air.Disadvantages. High voice. Low power.
If the low-and high speed needed to be the squamous cell system is used. If the power and speed needed to be at least the hydraulic system is used.
A pneumatic tyre (or in North America tire), is a tire which is inflated by air. This is in contrast to a solid rubber tire which some wheelchairs might use.