Basically, you cant get there from here. Forget the one programmed central locking keyfob. It has nothing to do with it. Two different systems entirely. The fact that you only have one programmed key is the killer. If you had a second key, then you could program a third yourself. You also cant disable the system yourself. If you want the second key to work, the dealer has to do it using either a WDS, PDS, or NGS scanner.
What is a diagnostic port
You can just pull the fuse to disable the auto locking.
Dead battery in FOB?
Either via Infra-Red or Radio Frequency key fob programmed with a receiver in your vehicle.
Hi put key in ignition turn on then off, Then press and hold the door locking button that is near the hand break count 12 flashes on the imobilizer led then let go of door locking button, Your imobilizer should be turned off, You can use your car. Best Regards John
i was able to do this by going to the fuse box under the bonnet and removing the power windows fuse, 25A 32v
Central locking on madza 2 not working
All remote key fob operations are listed in the manual. Locks can be programmed to do various things upon exit and entrance. If you have lost your manual then it can be downloaded from www.trailvoy.com or the GM website.
All Ford vehicles have a central locking system that were manufactured after 1993. The Ford focus has always had the central locking system.
yes it does , but its manual central locking. I can find the central lock button inside the car
A central locking kit converts your car to fully remote central locking which enables you to lock the entire car from the driver's door in an instant.
how do you reset remote central locking peugeot partner