How can you set an RCA universal remote to program the menu button to work the closed caption on a Sharp Linytron TV Model 25RT59?
3 people found this useful
Answer . Look up the code for the TV in the remote book or go to RCA.comm or something like that
Answer . You must access the menu fuction.Autosearch or manual add or erase channels.
Without knowing the remote model number, I would do this: To do a brand code search for Sharp: Manually turn on the TV. Hold down the "TV" button on the remote....while holdin…g it down also hold down the On/Off button on the remote for 3 seconds. Release both buttons. Press the number 6. The TV light on the remote should blink once. Press the On/Off button on the remote repeatedly until the TV turns off. When the TV turns off, press the STOP key on the remote to save the code. That should be it.
Answer . Look for the menu button on the manual control pushbuttons.
If your instructions aren't available, use the link to Thompson's instructions for the RCA remote.
how do i program a charter remote to a rca tv
To program a Symphonic TV with an RCA RCR-612 universal remote,there are four codes which you can try. Those codes are 1033, 1038,1046, and 1047. To try the codes, press and h…old the TV button onthe universal remote. After you enter the fourth digit, the powerlight will turn on. Once the light is on, release the TV key. Ifthe power light turns off, you have the correct code and can nowuse the remote. If the light blinks, it isn't the right code andyou need to repeat the procedure until you find the right code foryour particular TV.
RCA has a complete list of codes online: http://www.thompsontv.com/rcarc.html
remote control will not work
I need to find out how to get closed caption on a orion tv with a rca universal remote can anyone help
Try purchasing the manual.
In Dish Network
Here are the codes to try for your Sharp TV: 741, 739, 628, 740, 526, or 608. Here is the instructions on how to program the remote to your TV. Address Remote to TV . Wh…ile at the device location, point the remote at the device. Press and hold the device button on the remote. - All four mode buttons should light up . Enter the three-digit remote control code - The mode button you selected should light up If you are programming a code into AUX Mode, you must do the following before entering the device code: Â· Press 0 for a TV (if TV code is 500, enter 0500) Â· Press 1 for a VCR/DVD (if DVD code is 617, enter 1617) Â· Press 2 for any other device (if device code is 639, enter 2639) . Press the Pound (#) button - The mode button you are programming should flash three times . Press the large, red POWER button - The device should turn off Please let me know if you have further questions. Thanks.
In Dish Network
Follow the steps below to program the remote! There are also the top 5 most used codes for an RCA TV listed below. Codes: 503, 627, 666, 633, 725 Press and hold the clea…r TV button until all the mode lights light up. Release the button and the TV light will be blinking. Enter the code and press #. The TV button should flash 3 times. Try functions (Volume, Power, etc..) and see if it is working. If there is no function, repeat steps 1-4 with another code.
The Sharp TV remote codes for a RCA universal remote are either 01 or 02. The exact code will sometimes depend upon the exact model of a person's TV.