How do i program charter cable remote to work rca tv?
how do i program a charter remote to a rca tv
10 people found this useful
How can you set an RCA universal remote to program the menu button to work the closed caption on a Sharp Linytron TV Model 25RT59?
Without knowing the remote model number, I would do this: To do a brand code search for Sharp: Manually turn on the TV. Hold down the "TV" button on the remote....while holdin…g it down also hold down the On/Off button on the remote for 3 seconds. Release both buttons. Press the number 6. The TV light on the remote should blink once. Press the On/Off button on the remote repeatedly until the TV turns off. When the TV turns off, press the STOP key on the remote to save the code. That should be it.
If your instructions aren't available, use the link to Thompson's instructions for the RCA remote.
a. Press and hold the VCRâ¢DVD key. The illuminated ONâ¢OFF key turns on. b. While holding down the VCRâ¢DVD key, press and release the number 2 key on the k…eypad to control a VCR or the number 3 key to control a DVD. The illuminated ONâ¢OFF key turns off. c. Release the VCRâ¢DVD key. The illuminated ONâ¢OFF key blinks four times and then turns off. Your remote is now either in VCR or DVD Programming Mode, depending on which you chose. Proceed to step 4. 4. Press and hold the component key ( TV , VCRâ¢DVD , SATâ¢CBL ) you wish to program. The illuminated ONâ¢OFF key turns on and remains on. 5. While holding the component key down, press and hold the ONâ¢OFF key. The illuminated ONâ¢OFF key turns off. 6. After holding down both keys for three seconds, the illuminated ONâ¢OFF key turns back on. 7. Release both keys. The illuminated ONâ¢OFF key remains on. TIP: Throughout the programming of each key, be sure to keep the remote pointed at the IR sensor of the component you are currently programming the remote to control. 8. Press and release the PLAY key, then wait five seconds to see if your component turns off. If your component does not respond, continue to press the PLAY key every five seconds until your component turns off. Each time you press the PLAY key, the illuminated ONâ¢OFF key blinks and a block of 10 codes are sent to your component. This process continues until all of the codes in the Code Lists have been searched. (If your component has not turned off after all codes have been searched, the illuminated ONâ¢OFF key blinks four times and turns off. The Auto Code Search Entry method is exited.) 9. When your component turns off, you know the correct code is in the last block of 10 codes sent. Press and release the REVERSE key. Wait two seconds to see if your component turns on again. If your component does not respond, continue to press the REVERSE key every two seconds until your component turns on again. This will isolate the correct code in the last block of codes sent. Each time the REVERSE key is pressed, the illuminated ONâ¢OFF key blinks. Note: If you accidentally press the REVERSE key after your component responds, press and release the FORWARD key. Then, wait two seconds to see if your component turns off again. 10. Once your component turns off, you have found the correct code. You must save the new code by pressing and releasing the STOP key. The illuminated ONâ¢OFF key turns off. You must press the STOP key to save the code or the correct code will not be stored!
TV Stereo DVD VCR. Antenna cable to vcr. Vcr cable to tv. RCA cables between vcr tv. RCA cables between DVD tv. RCA cables between tv stereo. TV only works with tv remote not through DVD. Help?
put tv arial on DVD. Use DVD remote to change source on DVD from avi1 to tv channel then use DVD remote for tv.
\n. \nWHATS THE CODES FOR DURABRAND TV RCA RCR461
I want to tell you what just worked for me.... 1. Turn the component on that you want to program. 2. Press and hold that component key (TV, VCR/DVD, or SAT/CBL) on your remo…te. 3.Press ON/OFF button until your unit turns off.. 4. Press Stop button to program the "code" that you remote found to work your component.
i need to progra a rca system blink 4 remote to my westinghouse tv how do i do this
To program a Symphonic TV with an RCA RCR-612 universal remote,there are four codes which you can try. Those codes are 1033, 1038,1046, and 1047. To try the codes, press and h…old the TV button onthe universal remote. After you enter the fourth digit, the powerlight will turn on. Once the light is on, release the TV key. Ifthe power light turns off, you have the correct code and can nowuse the remote. If the light blinks, it isn't the right code andyou need to repeat the procedure until you find the right code foryour particular TV.
Myrio Remote Setup 1. Press a device key once. 2. Press and hold SETUP until the red LED blinks twice, then release. 3. Enter 9 9 1 , then the device group number (see tab…le below). The LED blinks twice. 4. Aim the remote at the device and press Power . The remote sends IR codes from its library to the selected device, starting with the most popular code first. If the device responds, go to step 6. 5. If the device does not respond, press CH+ . The remote will try the next code. Continue until the device responds. Note: Press CH- to try the previous code. 6. To set the code, press SETUP once. The LED blinks twice. 7. To search for other device codes, repeat steps 1 to 6.
RCA has a complete list of codes online: http://www.thompsontv.com/rcarc.html
I have a friend who was named after this TV set. So I feel qualified to answer. The answer is never.
First you have to find out the code for your TV. It should be a 3 number code and you can find it on the internet. Steps to figure out how to find out what your code is …If you need to find the three digit code for your TV, VCR or Cable Box after the device is set up, use the following procedure. The example given is for a unit which had been programmed to control a TV set. Please substitute CABLE or VCR in place of TV to retrieve codes for other devices. 1. Press and hold the CODE SEARCH button until the indicator light lights. Then release the CODE SEARCH button. 2. Press and release the TV button. (The indicator light will blink once and remain lit). 3. Press and release the CODE SEARCH button. The indicator light will turn off. 4. Starting with 0 on the keypad, start pressing the number buttons in order (0-9) until the indicator light blinks. 5. When the indicator light blinks, that is the number for the first digit of the code. Repeat step 4 to obtain second and third digit of the code. PROGRAMMING YOUR REMOTE TO YOUR TV 1. Once you know your code you have to press and hold code search until the light lights up. 2. Then let go and then press the tv button. It should blink once then stay lit up. 3. Type code it should turn the light off after all the numbers are typed 4. You have to press and hold the code search button again till the light lights up then let go when it does. 5. Press the tv button again then press the on/off button as many times as you need till it turns off (it only took me three times). 6. As soon as it turnes off the TV push it again and if it doesnt work try doing steps 1-5 again but if it turns it off again then press the power button on your TV then press the power button on your remote. It should turn it off and then your remote should be working. If not try to do 1-6 again.
In Dish Network
There are many codes available for an RCA tv. The main codes that work are 805, 627, 725, 503, 003, 641, 630, 830, 619, and 742. The related link below will allow you get addi…tional codes if needed!
In Dish Network
Follow the steps below to program the remote! There are also the top 5 most used codes for an RCA TV listed below. Codes: 503, 627, 666, 633, 725 Press and hold the clea…r TV button until all the mode lights light up. Release the button and the TV light will be blinking. Enter the code and press #. The TV button should flash 3 times. Try functions (Volume, Power, etc..) and see if it is working. If there is no function, repeat steps 1-4 with another code.
i tried using the precision code 166 to program the tv bgut itdidnt work. i used an RCA remote control and followed all thesteps.