How do replace serpentine belt on 1996 dodge caravan 3.3 engine?

already exists.

Would you like to merge this question into it?

already exists as an alternate of this question.

Would you like to make it the primary and merge this question into it?

exists and is an alternate of .

if you look under the hood on the upper left side by the hood hinge , there is a diagram of how the serpentine belt should be arranged. Fit the belt around all the pulleys except the tension pulley. Take a tork wrench and place on the nut in the center of the pulley and crank it towards yourself which will lower the pulley (please note that it is spring loaded so make sure you have it securely fitted or it will spring back at you. slip the serpentine belt on once you have created enough clearance to slip on...
9 people found this useful

How do you replace the water pump on a 1996 Dodge Ram that has a serpentine-single engine belt?

I would suggest starting by buying a Haynes Repair Manual for the 1994 to 2001 Dodge Ram pickups. This will include fairly straight forward instuctions on how to replace the water pump. Purchase a Haynes Repair Manual for 1994-2001 Dodge Ram Pickups. This will help with the basics. My problem was g

How do you replace the serpentine belt on a 2000 Dodge Grand Caravan?

Answer I found that when I needed to change my belt I also had to change the belt tensionor. I also had to get a special tool from my local parts store that would connect on to the tensionor to loosen the tension which then allowed me to remove the belt. The part was around 10-15 bucks I think.

How do you reroute a serpentine belt on a 1996 Dodge Caravan?

Answer . on a 3.0, get a serptine tool at autozone for $25 or a wrench/socket with a loooong handle to fit the tension pulley. place the tool on the bolt on the tension pulley and pull toward you. you will then have enough slack to complete the routing of the belt. i left the belt off the idler p

How do you replace the serpentine belt on a 2002 Dodge Caravan 3.8 V6?

Sears Hardware sells a nice tool which you can use to rotate the belt tensioner. It is essentially a long socket wrench with several shallow adaptors. I presume you should be able to get something similar at any auto parts store. If you don't have a copy of the Haynes Repair Manual, I recommend gett

How do you replace the oil pump on a Dodge Caravan 3.3 engine?

Most Dodge Caravan's don't have a replaceable oil pump. The oil pump is built in to the engine block and can only be rebuilt. The best (and fairly cheap) way to identify if your pump needs work is to put a manual gauge on the engine at the oil pressure switch. It is located near the bottom of the en

How do you replace the Serpentine Belt Tensioner on a 1998 Dodge Caravan?

Answer . I have a grand caravan, with a 3.8l engine. The s-belt slipped off on my way to work, and I went to put pressure on the tensioner, and the bolt snapped in half. I drove the van up on ramps, and was able to access the 15mm nut on the back of the tensioner. I went to O'Riley auto parts

How do you change the serpentine belt on a 1996 dodge caravan?

Study the belt diagram and also the way the old belt was put on, use a socket (16mm usually) and a breaker bar to pull the tensioner pulley down, releasing tension on the belt causing it to be able to slip right off. Slide the old belt off and weave the new belt in to place while still holding the t

How do you replace a 2001 dodge caravan water pump on a 3.3 engine.?

here is the easy way. jack or hoist the car up on the passengers side. remove tire and plastic panel. there are 3 bolts on the pulley. use a 13mm socket on the 3/8's ratchet and rest the head of it against the inner fender, take them out. now you can pull your pulley forward and manipulate it to rea

How do you you Replace 1997 dodge caravan serpentine belt?

Use a long socket to untorque the tensioner pulley. Put the new belt on in the pattern that the old belt was previously on. Make sure it is lines up in all the pulleys completely. Let the socket go back into the torqued position then take it off. close the hood and start the vehicle.

How do you replace the serpentine belt on 3.3L 1995 dodge grand caravan?

First raise vehicle be sure to use jack stands to support vehicle if a hoist isn't available!!Remove right front splash shield (passenger side). BEFORE you release tension on the belt by rotating the tensioner clockwise( look at the belt routing) Write it down.Example:Start at tensioner,belt goes ov

02 Dodge Caravan serpentine belt replacement?

Definitely NOT a job for the amateur. Very tricky and you really have to get the manual to learn how to do it. (personally, I wouldn't own ANY vehicle without getting the manual for it anyway)