Ok get some one to hit the gas for u so u can see where the pullie is that lets gas go throught witch is on the left side of the intake there is this screw that only lets it go so far forward loosen it up in it will start to decrease
Honda Accord 1998-2002 model GEN 6 idle speed is control by internal computer. You need to bring it to the dealer to adjust this.
Go to the mechanic down the blocc
The idle for a 1986 Honda Accord is adjusted by a idle air control valve. These function by either tightening or loosening the valve. This controls how much air is allowed into the system, more air means higher idle and less means lower.
On a 90-93 Honda Accord you can adjust the idle with a screwdriver. On the throttle body there is a screw on the top left above the intake duct. Just adjust until idle is in correct range (usually around 700)
see under hood direction, vehicle idle @750RPM in gear 15*
To adjust the idle speed on a 1993 Honda Accord, you will need to locate the adjustment screw which is located on the throttle body. This can stick at times due to obstructions. Once the screw is located, apply carb cleaner to loosen up any debris which may be causing the idle speed to be off.
On the rear of the carb there should be a black plactic knob on a shaft with a spring. You will probably have to take the air cleaner housing off. Tightenen to idle up, loosen to idle down.
1992 Honda accord throttle body adjustinThe throtle body has a screw on it self where the intake clamps on to. it is located on top by all the vacuums you can turn the screw with a phillip screw driver.
'90 Honda Accord will start but shut off. What could this problem be?
Tune up
Idle on a 1985 Honda Civic is adjusted through a idle air control valve. This valve is located near the intake. Adjust the valve by either loosen or tightening it.
check the vacuum hoses