0
if your problem is a sloppy pedal......... then you probably need to bleed the slave cylinder, not adjust the clutch cable.
As you correctly point out, this is a cable, not hydraulic, system. The adjustment is on the top of the transmission, towards the front of the car, between the motor and the battery. IT is usually a big black "cable" leading into a 3" while plastic adjustment mechanism, before the actual cable itself exits and heads to the clutch release arm.
In this case, you need 2 wrenches (13mm as I recall) and need to turn the white plastic bits until the clutch cable snugs up a bit.
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
Does a 1991 Chevy S10 have a clutch cable or is it hydraulic?
Hydraulic.
How do you replace a clutch on a 1991 Honda Prelude si with aws?
You can't aprrently on a hyrdraulic clutch, which these have that adjust automatically.
How do you adjust the clutch on a Mercury CApri 1991?
its a hydraulic clutch and needs no adjustment, if its loose it typically means its worn
Where do you adjust a clutch pedal on a 1991 civic?
It is hydraulic. There is no adjustment, it self adjusts.
How do you adjust clutch Nissan truck 1991?
Check your clutch master cylinder and slave cylinder for leaks,if no leaks,then you need a new clutch kit.
How do you adjust a clutch cable for 1991 Geo Tracker?
Behind the right front tire you will see where your clutch cable attaches to your clutch arm, holding on to the cable with a pliers, take an 11mm socket and wrench and turn the nut on the backside clockwise until your clutch is where you want it. Now if you have tighned up the nut all the way and it's still loose you need to take out the clutch pedal and check to see if the threads at the end are twisted, if so replace immediately, I had 1 snap off on me.
How do you adjust the clutch on 1991 Chevrolet 2500?
It is notadjustable, You either have a bad clutch slave cylinder, clutch master cylinder. The clutch and pressure plate may just be worn out.
How do you adjust your clutch on a 1991 Chevy Silverado?
There is no adjustment on that year. You either have a worn out clutch disc or a bad clutch slave cylinder. Could be a bad clutch master cylinder too.
Your clutch has been replaced and you are not getting any pressure on your clutch pedal how on a 1991 Chevy Cheyenne 454 how do you fix it?
if the clutch is hydraulic operated, bleed the cluth if it is mechanical cluth, adjust the linkages
How do you adjust kickdowncable corvette C4 1991?
To adjust the kick down cable there is a clip that u remove and adjust the sheth lenght. if you cant get enough adjustment from that they sell replacement cables that are adjustable. The technical name is Detent cable
Where is the clutch cable on a 1991 Mazda miata?
Isnt one, its hydraulic, and its next to the brake fluid resevior
How do you take off hydro clutch cable 1991 ford f150?
ford sucks buy a dodge
