First make that service brakes are adjusted properly
Adjuster should either be at the junction of the cables under vehicle or at the handle (may have to remove trim for access) itself Set brake to 3 clicks and tighten adjuster nut so wheels are locked at this point
HOW DO I TIGHTEN EMERGENCY BRAKE CABLE ON A 2002 MAZDA PROTEGE 5?
how to adjust the emergency brake
To add brake fluid in a 1990 Mazda Protege, you need to locate the brake fluid reservoir and check the levels. The reservoir is located on the master cylinder for the brakes.
How do you adjust the emergency brake on your 2001 S10 Chevy?
You can adjust your 1989 Chevy Corvette emergency brake into different ways. The emergency brake will have an adjustment bolt on the brake pad. The emergency brake cable can be adjusted to shorten or lengthen the cable.
On 2000 Mazda protege's the rear drum brake shoes use self-adjusters, they (sometimes) self-adjust, it looks like two levers facing each other and when you push the brake shoes away from each other the self adjusters move out more, adjust these until there is about 1 turn of drag on your brake rotor with the drum on, of course. If the handbrake is still lower than desired there is a 10mm nut (use a deep socket) on the drivers side of the handle inside the rubber flap, turn this to adjust brake lever height.
Above the brake pedal,its black plastic.
The emergency brake cable is connected to the brake shoe on the rear brakes. You can adjust the emergency brake by loosening or tightening the nut on the end of the cable.
Next to the master brake cly.
about 5mm then after that they will get hot and squeak
The majority of time if you adjust the rear brakes it will adjust the park brake.
How do I adjust my emergency brakes on my 1999 ford expidition?