answersLogoWhite

0


Best Answer

weather stripping

User Avatar

Wiki User

14y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How do you call the protective rubber velvet around the door frame top and laterals round inside the car?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

What is the container inside the hatch of a 1986 VW GTI?

This is the central locking vacuum pump and is located within a protective foam shell and secured by a rubber strap.


Is the rubber inside of a tennis ball affected by weather?

yes the weather effect the rubber inside


What is inside a golf ball?

Inside a golf ball can be many things. It could have a rubber ball, with rubber bands, and some have a cork and rubber


When replacing the ears on a 1978 Honda CB550K4 where do the rubber gaskets need to be placed?

The rubber gaskets are placed inside and in some cases around the bike frame ears or fasteners.


Why does your car engine have black tape around the tubes?

It's primarily used as a protective insulator around the engine's electrical wiring harness but may also be used to protect easily damaged rubber hosing.


Why does Throttle stick on 1997 Honda Passport?

I had a stuck throttle on my 1996 Passport. The throttle cable had a piece of protective black rubber around the throttle cable between the outer cable covering and where the cable connects to the throttle body. The rubber had began to come apart and some of it was getting inside the throttle cable covering, causing the throttle cable to bind. I removed the rubber piece and cleaned out the cable by covering it with GOOF-OFF and then sliding the cable in and out until my cleaning rag was clean when I wiped off the cable. I did not replace the rubber piece and have had no problems since.


How do you fix a water leak to the inside of a 2001 Subaru Outback hatchback door?

Most leaks occur because of a failing rubber seal. Open your hatch and you'll see a rubber hose that outlines the inside of your hatch, if you follow it around the inside, you may find one that is failing. Find a water trail and track that to the seal and this should be the culprit. Go to your local hardware store and purchase stop leak or a rubber sealer and use liberally around the area.


How many parts do an American football have?

3 the inside rubber the outside rubber and the stitches


What is the name of rubber substance inside strapless bras to prevent slippage?

Undercover rubber


How do you mould rubber to fabric without letting the fabric flow with the rubber?

you have to coat the fabric first so it can stick with rubber inside mould. for that you have to take a small tank. put some rubber in it. then put m.e.k solution in it and mix it will unless rubber is mixed well in solution . now pain the fabric with the prepared solution. let the fabric dry. now use it with rubber inside mould . it will stick well with rubber inside mould.


What is the inside of a basketball made of?

They line them with rubber.


Why does your faucet leak from the back when you turn it on?

Rubber bushings inside the faucet are worn. Replacement kits at local home stores for around $7.