First as I'm sure you know....put the truck on jackstands and remove the wheel. Depending on the year....you have either slide off rotors...or the rotor is all one piece with the hub. Turn the wheel to the appropriate side that you are working on..this will allow easy access to the caliper bolts. The caliper bolts on a Chevy are an Allen head there are two of them located on the inside rear of the caliper.Remove these bolts...and lift the caliper up off the rotor...you may have to do some prying to get it off. Using a piece of wire or something that will support the weight of the caliper tie it up out of your way....Then using a deadblow hammer tap the rotor around the outside edge...it should pop off the hub...if not spray some PB blaster around the hub..or WD 40..wichever is handy
Change front brake rotors on a 1998 Hyundai Accent?
remove the brake caliper and the rotors come right off
It can be easy to change the brake rotors. Lift the car, remove the tire, brake shoe and rotor, put on the new rotor, replace the brake shoe, tire and lower the car.
You will find that the front brake rotors are located behind the front of your wheel spindle, (behind your wheel and brakes). There you will see the rotors.
They sell front brake rotors at Auto Zone, Pep Boys, Goodyear, Firestone and their are other places that sells front brake rotors such as Sears, Walmart and Sam's.
You will need to remove the front tire and wheels from your 2002 Jeep liberty. Remove the brake pads and break assembly. Tap the rotors with a hammer or mallet. The rotors will come off. Reverse the process to install the new rotors.
Tap on the rotors with a hammer, after removing the tire and wheel and the brake assembly. The rotors will come loose. Slide the rotors off and reverse the process.
It is important for a person to learn how to change the brake rotors. A person needs to lift the car, remove the tire, brake shoe and rotor, put on the new rotor, replace the brake shoe tire and then lower the car.
You will need to remove the tire and wheel. You can remove the brake pad and break assembly, by removing the brake spring and caliper. Loosen the rotors with a hammer. The rotors will slide off. Reverse the process to install the new rotors.
( 2 rotors on the front ) one for each DISC brake
Pull the tires off and take the brake calipers off and the rotors will pull off.
You remove the wheels, remove the brake caliper and the rotor is then free .