0
You must remove the rear pipes from the bike. This is very easy and with only 2 allan head bolts that hold them on. On the rear brake you will see two chrome bolts remove these bolts.
Follow the brake line down to an 8mm bolt that is bolted to the frame (it is just a clamp that holds the line from moving) remove the 8mm bolt.
You now should be able to remove the brake caliper from the bracket. You will see a plastic cover on top that says: Remove for Service (or something of that nature). Remove that cover with a flat head screwdriver.
You will now need to compress the brake calipers. I did this by removing the brake fluid cap (in front of the bike again you must remove a bolt to get to this cap). I used a large flat head screwdriver to press in both calipers in.
You will now see two pins with carder pins holding them in. Pull the carder pins and pull out the two silver pins, remove old brakes. You can do this by pulling straight up on them. Replace with new brake pads and put everything back together.
Good luck and keep it in the wind...........
The above procedure is correct and per the manual. However, it's actually possible to change the pads without removing any bolts at all. The hardest part is putting the cotter pins back into the brake pins. A small mirror helps with that job. ---ts
Wiki User
∙ 14y ago
Wiki User
∙ 9y agoFirst remove screw from the master cylinder's reservoir this will require a Phillips screw driver .Then remove the mounting bolts from the brake caliper , remove pads and insert new ones.
Wiki User
∙ 9y agoRemove the oil plug from the bottom of the oil pan. Allow the engine oil to drain completely out. Replace the plug to the bottom of the oil pan. Fill with engine oil.
Wiki User
∙ 9y agoBegin by removing the front tire and wheel from your Yamaha 1100. Remove the wheel bearing nuts. The wheel bearing will come off. Reverse the process to install your new wheel bearing.
Wiki User
∙ 15y agoopen the pistons up and pull the pins, replace pads making sure to put them in the correct spots and replace pins
Wiki User
∙ 15y agoGet your brother to help you.
Add your answer:
Earn +20 pts
How do you change the rear tire on a Yamaha c3 scooter?
Change rear tire on c-3 yamaha scotter
What is the oem tire size for a 98 Yamaha grizzly 600?
Front is 25x8x12 and Rear is 25x10x10
How do you change the rear brakes on a 2004 Saturn Ion?
Check out the related video on how to change the rear brakes on a Saturn.
How do you change rear drum brakes on a Yamaha moto4?
my breaks stuck after we got the four wheeler back from a crapy mechanic. how do i get the drum off to free the breaks ?
How do you adjust the brakes on a 2002 Yamaha ttr 125 they are the drum brakes?
Only the rear brakes are drum brakes. The front brakes are disc brakes. To answer your question, twist the end wing nut by your drum brake. It tightens and adjusts how much you have to press on your rear brake lever.
How do you change rear brakes on a 1994 Cadillac Seville?
I need a daigram of the rear brakes being changed
How do you change rear disc brakes on 2002 mustang v6?
how to change front and rear brakes on a 2003 ford mustang V-6
Can you change a 1997 Mitsubishi eclipse rear drum brakes for disc brakes?
yes you can get a kit to convert brakes
How do you change the rear brakes on a 1990 Acura Legend?
same as the front brakes they r both disc brakes
How do you change brakes on a Honda Pilot 2006?
How do you change fron t and rear brakes on a 2006 Honda pilot lx
How do you change the front and rear brakes?
They take ceramic brakes all the way around and they change just like others.
How do you change rear brakes on a 2003 protege?
You Tube "Happywrenching.com". Incredible video on how to change rear drum brakes on a 99-03 Protege. Did the entire brake job myself! :)
