What would you like to do?

How do you change serpentine belt on a 2000 Chevy cavalier?

already exists.

Would you like to merge this question into it?

already exists as an alternate of this question.

Would you like to make it the primary and merge this question into it?

exists and is an alternate of .

Note:The drivebelt routing decal on the radiator shroud to help during drivebelt install
  • To replace the belt rotate the tensioner pulley clockwise to release belt tension
  • Remove the belt from the auxiliary components and slowly release the tensioner
  • Route the new belt over the various pulleys again rotating the tensioner to allow the belt to be installed then release the belt tensioner
6 people found this useful
Thanks for the feedback!

How do you replace the serpentine belt on a 1997 Chevy Cavalier?

>Hey Darlene==Use a wrench on the bolt through the idler pulley to raise up on the pulley and take the tension off of the belt. There should be a schematic for the routing of

How do you put a serpentine belt on a 1994 Chevy Cavalier?

the way I do it makes it EZ I take the top bolt out of the alternator and push it back then go around all your pulleys but the one in the middle that adjusts the tension. afte

How do you de-tension the serpentine belt on a 1995 Chevy Cavalier?

If your car has a tensioner pulley it can be moved to release the tension on the belt for removal. Make note of the routing of the belt before removing it. This will make ins

How do you change a serpentine belt on a 2000 Chevy Tracker?

  Answer   There is a tension roller in about the center of the pulleys. (This is the smooth roller, probably bronze-colored, just left of the center). Using a #14 m

How do you install the serpentine drive belt on a 1998 Chevy Cavalier?

    For the home "do-it-yourselfer":.     I put the belt around all the wheels except the alternator, then I put a strong rope around the belt and as I pulled i

How do you replace a serpentine belt on a 1998 Chevy Cavalier?

Note: The drivebelt routing decal on the radiator shroud to help during drivebelt install. To replace the belt rotate the tensioner pulley clockwise to release belt tension .

How do you change a serpentine belt on a 1991 cavalier?

  Answer SERPENTINE R&R   Using a suitable wrench on the bolt head at the center of the tensioner, rotate the tensioner away from contact with the belt to allow belt

How do you replace serpentine belt on a 2000 Chevy cavalier 2.2 liter?

  Note:The drivebelt routing decal on the radiator shroud to help during drivebelt install   * To replace the belt rotate the tensioner pulley clockwise to release belt

How do you change a 2000 Chevy cavalier serpentine belt?

  Note:The drivebelt routing decal on the radiator shroud to help during drivebelt install   * To replace the belt rotate the tensioner pulley clockwise to release belt

How do you Change serpentine belt on 2000 Chevy suburban?

Must be similar to my 98 suburban. Make sure there is a sticker that tells you the routing for the belt somewhere on the front of the car under the hood. Buy a good gates belt