(N cubic meter/hour) x (3.28084 feet/meter)3 x (1 hour/60 minutes) = 0.58858 N cubic feet/minute
(rounded)
1050
1050
11
Which type of ton - metric , short,or long? Since it looks like you are converting to gpm (grams/minute?) I'll use a metric ton. 1 metric ton (mT) = 1000 kg 1 (mT/hr) * (1000 kg/1mT) * (1000 grams/1 kg) * (1 hr/ 60 min) Doing the calculations you get: 1 m/hr = 16,666.667 grams/min
approximately 5.5 miles/hour ============= Solution Method: ----------------- There are 60 minutes in 1 hour. We often say there are 60 minutes per hour. We express this relationship mathematically as: 60 min/hr To convert miles/min to miles/hr, do the following: 1 mile/11 min * 60 min/1 hr = 60 / 11 = ~5.45 miles/hr (average speed) * Note: minutes cancel in the numerator & denominator). ----------------- Original answer: 60/11 = 5.45 recurring (that is, 5.45454...) miles per hour. Therefore, running a mile in 11 minutes corresponds to 5.45 recurring miles per hour.
around 12 to 13 minutes
10.9 miles per hr. (approx..)
Use unit analysis to solve this problem. In one hour there are 60 minutes and in one day there are 24 hours. That is, hr/60min and day/24hr (The division can be pronounced "per", as in "60 minutes per hour" or "one hour per 60 minutes") Using these two terms, divide out the minutes and multiply in the days: 3500min * hr/60min * day/24hr The "min" units in the numerator of 35000 cancels out with the 60 min in the denominator of hr/60min. Same with the "hr". What you are left with is 3500 * 1/60 * 1day/24 Multiplying this out is approximately 2.43 with the unit of "days" left in the numerator.
You cannot convert kilograms per hour (kg/hr) into nanometers cubed per hour (nm3/hr). The kilogram is a measure of mass or weight while the cubic nanometer is a measure of volume. There is no direct conversion, unless you specify the density of the material involved.
Cmh = cubic meters per hour cfm = cubic feet per minute m3/hr * 35.3ft3/m3 * hr/60minutes = ft3/minute So, 1 cmh = 0.5883 cfm
suppose your line pressure is 2bar so m3/hr= Am3/hr(1+line pressure) and from m3/hr it can be converted to Nm3/hr using ideal gas law
88.7 km/h
73.33 feet per second.
(66 km/sec) x (3,600 sec/hr) = 237,600 km/hr
There are 0.621 miles per kilometer, so to convert, one uses the following formula: miles = 0.621 * kilometers For example, if one travels 100 miles, they will have travelled: 0.621 * 100 = 62.1 miles. Algebraic Steps / Dimensional Analysis Formula____ mi/hr*5280 ft/hr 1 mi/hr*1 m/hr 3.2808 ft/hr*1 km/hr 1000 m/hr=? km/hr Direct Conversion Formula ____ mi/hr*1.609344 km/hr 1 mi/hr=? km/hr
Approx 3.51 cu ft per hour.
104,6 km/h
You need to look at a steam table first then Multiply lbs/hr steam x latent heat of evaporation in BTU/lb @ the operating pressure.
You need to know the denisty measured in kg/m3. Then just divide kg/hr by the density to get m3/hr.
(Qkm/hr) x (1,000 m/km) x (1 hr/60 min) = 162/3Q meter/minute