0
onboard video cards are enabled or disabled in the system bios, which is able to be entered on boot by pressing a key or key combination, your documentation should tell the key or keys to press. Also the onboard video card can be disabled in the system controle panel in windows, However doing so this way can cause system conflicts as it will still delegate recources and an interrupt to the disabled video. Perfered way is from the system bios
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
What tool in windows vista used to temporarily disable a startup program is not available in windows xp?
You can use Windows Defender to disable programs that run at startup, or using System Configuration.
Can you get dts and dolby 5.1 effect from a PC or laptop?
You need either a motherboard that has built-in 5.1 or better capability; if you don't have that, the only alternative is to add a soundcard that has the capability. If you're currently using the onboard sound, you'll have to disable the onboard sound in the BIOS before using the new soundcard.
How do you use a xbox 360 controller on windows?
If you are using a wireless controller you cannot use it with your computer. If it is a USB controller, simply plug in the USB head into a USB port on your PC and all drivers will be preinstalled on a Windows machine. Before you use it, please configure the keys that the controller will use.
Host computer has been compromised by out side attack on ports 1070 and 1071 what to do?
If you are using windows the go to ->control panel -> windows security -> disable your selected port. or your can disable this port by configure your modem contact your operator.
How do you disable a storage device by using BIOS and configure driver signing verification?
Disabling a storage device may be possible by entering the BIOS, finding the controller settings, and turning off the port you wish to disable. In some BIOSes, there is no option to disable controllers, unplugging the power from the device will work as well. Depending on the version of Windows you are running, configuring driver signing verification will differ. On Windows 7, one method of configuring it is to open a command prompt as an Admin and type bcdedit -set load options DISABLE_INTEGRITY_CHECKS followed by bcedit -set TESTSIGNING ON.
How do you disable a storage device using BIOS and configuring driver signing verification?
Disabling a storage device may be possible by entering the BIOS, finding the controller settings, and turning off the port you wish to disable. In some BIOSes, there is no option to disable controllers, unplugging the power from the device will work as well. Depending on the version of Windows you are running, configuring driver signing verification will differ. On Windows 7, one method of configuring it is to open a command prompt as an Admin and type bcdedit -set load options DISABLE_INTEGRITY_CHECKS followed by bcedit -set TESTSIGNING ON.
Can you disable balloon tips for all users using Group Policy?
Yes, for Windows XP and Windows 2003, but not for Windows 2000. The answer lies within Administrative Templates | Start Menu and Taskbar | Remove Balloon Tips on Start Menu items.
The unattend.txt file included as a sample on the windows xp professional CD can be used as is to perform an upgrade of windows NT workstation?
In Microsoft Windows NT, you can automate the installation of a domain controller using unattended Setup, or while performing a normal, attended installation.
What is windows zero config mode?
Have a look at some advice about not needing WZC Mode if you are only using your single, home wireless network at http://paininthetech.com/2005/10/25/disable-wireless-zero-configuration-in-windows-xp
How do you get rid of a firewall?
depends on the software you are using for the firewall. if your using windows xp firewall just disable it. start-->control panel-->firewall then click the opt button to turn it off. This is not a detailed enough answer neither does it work.
Inverted pendulum using discrete and continuous controller?
Discrete controller
Why system with Windows 2000 server and Active Directory hangs or starts some malfunctioning?
The HP Netervers LXPro, LX, and LXe system will hang during Windows 2000 installation if you attempt to boot from the Windows 2000 CD and if any Adaptec SCSI controller (including the system's embedded SCSI controller) is configured as the first bootable device on the PCI bus. Furthermore, there must be an additional storage controller configured to boot in sequence after the Adaptec SCSI controller.The HP Netservers LH Pro, LD Pro, and LH II system will hang during Windows 2000 installation if you attempt to boot from the Windows 2000 CD and if any Adaptec SCSI controller (including the system's embedded SCSI controller) is configured as the first bootable device on the PCI bus, and it is connected only to a CD ROM drive. Furthermore, there must be an additional storage controller configured to boot in sequence after the Adaptec SCSI controller.NOTE: The boot order is: slot 1, slot 2, slot 3, slot 4, embedded SCSI A, embedded SCSI B, slot 5 and slot 6.On NetRAID only: Disable the boot priority on the embedded SCSI via ECU. The HP NetRAID adapter must be placed in slots 1, 2, 3 or 4.'''SOLUTION:Install Windows 2000 using Windows 2000 setup diskettes.Creating setup diskettesFour blank formatted diskettes are needed. Label them as listed below: * Windows 2000 setup boot * Windows 2000 setup disk #2 * Windows 2000 Setup disk #3 * Windows 2000 setup disk #4# Place the Windows 2000 CD on a system running Windows NT or Windows 95. # Open a command prompt and change to the d:\bootdisk directory (assuming that D: is your CD-ROM drive). # At the command prompt type: makebt a: (If using a DOS or Win 9X system) makebt32 a: (If using an NT system)# Follow the on-screen instructions provided by the utility.Starting the installation Windows 2000 using setup diskettes# Boot from the Windows 2000 setup boot diskette. # Follow the instructions displayed, replacing diskettes as necessary. # Install HP drivers when prompted.'''
