If you look at your Distributor, you will see a 4-wire connector on the left side of it.
unplug the connector. and then look at the connector end that comes from the
distributor it will have letters wrote on it. Find the letters A and C Now make you up
a little short wire with ends on it that will hook to the small A and C pins and hook the A and C pins together so the jumper wire don't fall out. THATS IT.
Don't worry about the other end of the connector. just tie it back out of the way.
NEUTZ
it means enable or disable BLUETOOTH
ESC / Electronic Spark Controll Circuit. and the knock sensor signal.
drivers side firewall behind master cylinder
Could be the ESC (Electronic Spark Control) mounted to the center of the firewall under the hood.
yes, when in video 1 mode use remote: Press (esc)(esc)7714(ok) that will take care of it. or (esc)(esc)7197(ok) a master reset is (esc)(esc)19750601(ok) window main screen (esc)(esc)9702(ok) hope this helps!
ESC Lille was created in 1892.
ESC Bretagne Brest was created in 1962.
esc off light
Emeritus Corporation (ESC)had its IPO in 1995.
I have a 92 s10 blazer and my code 43 was fixed by replacing the knock sensor. so maybe check the knock sensor and the wiring from that to the ECM.
The keyboard shortcut notation ctrl plus esc means you press the Control key concurrently with the Escape key. On a Windows PC, the Ctrl + Esc shortcut produces the Start Menu.
The cast of Esc - 2012 includes: Barrington Cullen as Boss