Remove side trim on passenger side and undo 13mm bolt and remove to answer ur question do reverse :)
yes they will
yes as long as they are the same stud fitment. The mk4 golf is 5x100 bolt pattern and the mk3 golf is 4x100. unless it's a vr6 model which has the 5x100 bolt pattern so in general the mk4 wheels will not fit a mk 3.
GM plastic adhesive!
You need to modify the mk4 steering wheel to fit. Get the 3.5 cabrio wheel. It looks similar and no mods required
No they do not. The Mk3 uses an entirely different headlamp as compared to the Mk4. They will only fit if you swap the front end of your Mk3 with a Mk3.5 Cabriolet. Furthermore, Hella Makes Headlamp units that look very similar to the mk4 headlamps.
yes I belive so
No they can not. I made the mistake of buying some but they are completely different from MK4's so don't waste your time.
No they fit different, although mk2 and mk3 and some mk4 polo gearboxes will fit. You want an 8P gearbox.
Yes the Golf Mk4 can take an offset of between 35 to 42 with no modifications, anything more or less you will need spacers or body modifications! check this site out: http://www.carlsalter.com/wheel_fitments.html
No, the floor pans are completely different. The MK3.5 will fit the MK4.
Yes, with a few caveats. The 1.8 20 valve turbo from the mk4 Golf is a very popular choice for engine transplants and will fit all Golfs including mk2 and mk3 models. Various VW/VAG forums have a wealth of information on this subject. SD
Is it a MK4 or MK5? - Take the stereo out and make sure none of the wires are faulty. Also, did you fit this by yourself or did you get someone else to do it?