answersLogoWhite

0


Best Answer

If someone has applied a lacquer to stop the brass from tarnishing,it's likely that they have used either acrylic or oil based clear from an aerosol can.(some of the acrylics are of good quality) You should be able to remove it with acetone and clean cotton rags.If a 2-part polyurathane is on it, it will need paint stripper, but this is unlikely.

User Avatar

Wiki User

15y ago
This answer is:
User Avatar
More answers
User Avatar

Wiki User

11y ago

Its worrying that there is mould in there in the first place!

You can pay for it to be chemical cleaned or ultrasonic cleaning an any brass repair merchants.

This answer is:
User Avatar

User Avatar

Wiki User

11y ago

Paint stripper worked for me.

This answer is:
User Avatar

User Avatar

Wiki User

11y ago

you can't you will have to get a new one.

This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How do you remove the lacquer from a saxophone?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How do you remove nitrocellulose lacquer?

Lacquer thinner will possibly remove it, chemical stripper will definitely remove it.


How do you remove black tar adhesive?

Lacquer thinner will remove it from most materials.


How do you remove printing on PVC pipes?

Lacquer thinner.


We want to remove epoxy phenolic lacquer from tinplate sheet's The Tinplate sheet were first coated with lacquer and than heated at 190 degree Celsius.?

Use heated lacquer remover.


Will lacquer thinner remove dried paint from a paint sprayer?

It depends on the type of paint. Lacquer thinner will remove most oil based and latex paints from a paint sprayer, however, spray gun cleaner will remove it better.


How do you keep the lacquer from peeling on an alto saxophone?

Unfortunately, as far as I know, there isn't really a way to stop this. The best way to help prevent this is to be very careful with your sax, but it's virtually impossible to keep those pestering little scratches off your lacquer.


How do you remove oil based paint from door hardware?

Use lacquer thinner on a rough rag. If necessary remove hardware from the door.


Oriental Lacquer ?

form_title= Oriental Lacquer form_header= Keep your home beautiful with oriental lacquer. How much lacquer do you need?*= _ [50] Where will you be using the lacquer?*= _ [50] What is your budget for lacquer?*= _ [50]


How do you remove a lacquer floor finish?

We were attempting to remove lacquer from a quarry tile floor. We had inadvertantly put lacquer on quarry tile, which I guess is a no-no. We had a white discoloration that was appearing after only a few days after application. This discoloration was determined to be lacquer that was not bonding properly, and the problem was growing. The only way to correct this problem was to completely remove the lacquer. We sought help through this help sight, but got no answers, so we experimented on our own. We reasoned that lacquer thinner should thin lacquer, so maybe it would remove it. We tried a test area, and it did remove it, but not completely. We deduced that we were only thinning it, and when it dried, there was still just a thinner layer on the quarry tile. So we went to a more powerful thinner- acetone. Acetone has a quicker evaporation rate than lacquer thinner. We used absorbent rags and wiped on the acetone and off with the lacquer ! We had to repeat the process several times with clean rags each time, to get it totally clean. Our rags turned yellow after they dried, indicating to us that we were getting the lacquer finish removed. Keep in mind that we used lots of precautions- cannister-style breathing apparatus, rubber gloves, non-absorbent knee pads, lots of ventilation, etc., etc. We made sure all heaters, etc. were turned off so not to ignite any fumes. DO NOT attempt to take off any lacquer without at least the above protection, if not more !


Can you spray acrylic lacquer over acrylic lacquer?

No, the solvents in lacquer are to hot and volatile. The lacquer will cause bubbling of the acrylic paint.


How do you remove wood varnish from exposed wall bricks?

You'll need to use some lacquer thinner and a wire brush to remove any varnish on brick.


How do you remove hardened nail polish from stainless steel?

Lacquer thinner will remove it, then the stainless should be wiped completely dry of any residue.