Penetrating Oil a good brand like GUNK! Spray that down the sleeve and it should lubricate the socket enough to release it.
Remove the spark plugs with a 5/8 deep well socket. Turn the socket to the left. Tighten the new spark plugs by turning socket to the right.
18 mm spark plug socket
right on top of the motor. pull the spark plug wires out and use a 18 mm spark plug socket .and there ya go
5/8 inch spark plug socket.5/8 inch spark plug socket.
With a spark plug socket and socket wrenches and extensions.
Under the plate on the very top of the engine. By the oil cap. These are very hard to replace because they are vertical and set down in a sleeve about 4" utilize an extension on your socket wrench..sometimes you may have to disengage the extension from the socket wrench and turn it by hand to start the new spark plug into it's proper Thread pattern.
It requires a 5/8 inch spark plug socket and an extension.It requires a 5/8 inch spark plug socket and an extension.
the spark plugs require a 5/8 inch spark plug socket.
Should be a 5/8 spark plug socket.
You need a 5/8" spark plug socket.
a standard 5/8 deep socket spark plug wrench
To replace spark plugs, you can use a socket wrench, but a socket made for removing and replacing spark plugs is needed. This socket is relatively inexpensive and can be found at most auto parts stores.