answersLogoWhite

0


Best Answer

To get iron out of the water you are going to need professional help!!!!! Go to the nearest swimming pool store with a sample of the pool water. Make sure you explain to them you think you have iron in the water. They should be able to help you get your pool to normal. Iron can stain the surface of you pool there are several chemical companies that have a stain removing process that is very successful. Jack's Magic is one and Natural Chemistry is the other. Both have a stain identification kits you can use to calculate what process will work best. The company you take the water to should be able to help you through that process.

First of all don't run to a professional for help all you need to do is go to the grocery store or hardware store and buy IRON OUT. This will remove any iron in the water and will dissipate, Also be sure to get some ALUM from the grocery store ( found in the spice isle and is also used for making pickles. makes them crisp. it is save to swim in) to remove the copper

Here is our favorite product:

A popular product, especially where water is hard and contains Iron, is something called ferritabs. They were produced previously by Hydrology Laboratories, a division of Aqua Clear Industries, in packages of 10 per box, and designed for sand filters or de filters. See the photo of the old tabs and packaging, this for de type filters.

A regional supplier has purchased the rights to produce Ferri Iron Tabs so once again they are available.

Ferri-Iron Tabs are water treatment tablets that help eliminate the discoloration caused by iron and manganese.

They have been formulated for use in all filters EXCEPT diatomaceous earth filters.

These double-action tablets have been formulated to help decolorize water that has been colored by IRON or MANGANESE. These discoloring insoluble materials are removed from the water by charge neutralization and flocculation.

This non-toxic formulation is completely soluble in water and contains no caustic or corrosive chemicals, diatomaceous earth, alum or any chemicals that will alter the pH or chlorine level of the water.

Directions: Make sure pool water has a pH of 7.2-7.6, and contains a measurable amount of chlorine by adjusting with chemicals as necessary. Chlorine will not effect the Ferri-Iron Tab action on Iron or Manganese. Make sure the pool filter is in good operating condition and has been turned on.

Drop 1 tablet for each 3000 gallons of pool water into the skimmer basket. In large pools that have multiple skimmers distribute the tablets.

For best results, add the required tablets over a period of a few hours. Keep the filter operating. In order to permanently improve the water quality, the filter must be thoroughly back-washed within 18-24 hours after treatment.

In pools that have severe problems, repeat dosage and back-wash procedures after 24-48 hours.

In order to prevent a recurrence, when adding make up water and 1 tablet for each 3000 gallons or less of fresh water.

User Avatar

Wiki User

12y ago
This answer is:
User Avatar
More answers
User Avatar

Wiki User

8y ago

Iron salt? I assume you are talking about iron the mineral. The method to get rid of iron depends on several different things. First the type of sanitizer you are using and how high the iron level is. So if you can send another question with the that information and how many gallons of water you have in the pool I can answer your question in better detail.

This answer is:
User Avatar

User Avatar

Wiki User

12y ago

A popular product, especially where water is hard and contains Iron, is something called ferritabs. They were produced previously by Hydrology Laboratories, a division of Aqua Clear Industries, in packages of 10 per box, and designed for sand filters or de filters. See the photo of the old tabs and packaging, this for de type filters.

A regional supplier has purchased the rights to produce Ferri Iron Tabs so once again they are available.

Ferri-Iron Tabs are water treatment tablets that help eliminate the discoloration caused by iron and manganese.

They have been formulated for use in all filters EXCEPT diatomaceous earth filters.

These double-action tablets have been formulated to help decolorize water that has been colored by IRON or MANGANESE. These discoloring insoluble materials are removed from the water by charge neutralization and flocculation.

This non-toxic formulation is completely soluble in water and contains no caustic or corrosive chemicals, diatomaceous earth, alum or any chemicals that will alter the pH or chlorine level of the water.

Directions: Make sure pool water has a pH of 7.2-7.6, and contains a measurable amount of chlorine by adjusting with chemicals as necessary. Chlorine will not effect the Ferri-Iron Tab action on Iron or Manganese. Make sure the pool filter is in good operating condition and has been turned on.

Drop 1 tablet for each 3000 gallons of pool water into the skimmer basket. In large pools that have multiple skimmers distribute the tablets.

For best results, add the required tablets over a period of a few hours. Keep the filter operating. In order to permanently improve the water quality, the filter must be thoroughly back-washed within 18-24 hours after treatment.

In pools that have severe problems, repeat dosage and back-wash procedures after 24-48 hours.

In order to prevent a recurrence, when adding make up water and 1 tablet for each 3000 gallons or less of fresh water.

This answer is:
User Avatar

User Avatar

Wiki User

9y ago

The use of the metal trap filters helps get rid of iron in the pool water. A product like the Liquid MetalTrap which works with a wide variety of pH will be able to get rid of the iron in the pool water.

This answer is:
User Avatar

User Avatar

Wiki User

18y ago

I use a chemical called "suspend" we fill (refill) our pool with well water and this product works great!

This answer is:
User Avatar

User Avatar

Wiki User

9y ago

Iron can be removed out of water by making use of the water softeners. Iron can also be removed out of water by using gas such as the sodium hypochlorite.

This answer is:
User Avatar

User Avatar

Wiki User

13y ago

If there are no steel pipes used in the pool construction then the iron was present in the water before it was added to the pool.

This answer is:
User Avatar

User Avatar

Wiki User

9y ago

Yes, but it will only remove iron stains in toilet and sinks.

This answer is:
User Avatar

User Avatar

Wiki User

18y ago

Use Ferrotabs.

This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: What is the best way to remove iron from your swimming pool water?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

Can you remove iron from deep well water?

Yes you can.


How can physical properties be used to separate iron sand salt and water?

Use a magnet to remove the iron, a filter or screen to remove the sand, and a still to remove the salt.


How do you separate mixture of iron filings water and clay?

evaporate the watercrush the clay-iron mixture to powderuse a magnet to remove the iron from the clay


What causes Brown marks thast will not brush off salt water fibreglass swimming pool?

Usually iron


Remove iron from well water?

It depends on the concentration of iron. Anything above 0.3mg/litre should be treated with an iron filter system


How do you remove iron from deep well water?

If it is more than 0.3mg/litre then you need an iron filter system


How do you remove 7ppm of iron in well water?

Pure water is obtained by distillation, demineralization, inverse osmosis; but 7 ppm iron is not so much.


Which is the best insulator of heat iron water nitrogen or alchohol?

water


Is it okay to have iron in your pool water?

Any iron in a swimming pool is likely to cause staining. Visit your local pool store and have it tested and based on the results of the test they can provide a sequestering agent to help remove the iron.


Explain how you can use physical properties to separate filings from sawdust?

If they are iron filings, you can use the property of magnetism to remove the iron filings using a magnet. You will need to rinse the iron filings with water after you remove them with the magnet in order to completely remove the sawdust from them.


What are the benefits of using water treatment?

Would you drink a glass of water that was brown or green with little creatures swimming in it? Water treatment includes taste & order control as well as making it bacteria free and clear and filters remove the mystery materials. (iron, flock, sediment)


What is the function of Hcl in toilet cleaners?

To remove hardness and or Iron issues in the water.