Release the hand brake. With a brake adjustment tool, retract the brake shoes inward. You will then be able to remove the drum.
AnswerSupport the car well and release the parking break. Drum will come right off.They get rusty. Use WD-40 at the center part of the drum between the lug bolts being careful not to get any on the shoes and inside of the drum, a few bangs with a rubber mallot wouldn't hurt then use a pry-bar like a tire tool or really big screwdriver but try not break anything.
8"
how to remove rear brake drum on 1994 cavalier
Your brake shoes can drag on the drum and overheat. This will cause premature brake pad wear and hurt the cars performance and gas mileage.
Cavalier's were made with both and the cars model wont even tell you which size your cavalier has. You need to take off the wheel and try to read the stamp on the drum or if it's too rusted you'll have to take off the drum and measure the inside diameter where the shoes sit.
Drum
Disc/drum brakes DOT 3
How do you change rear brake drum on a 2004 Chevy Venture?
you get a towel and clean
i need a diagram of a 2005 Chevy silverado read drum brake setup
Yes Lowe's sometimes publish their coupons in the paper. You can also find some on their website or the flyers in their stores.
Easy as pie, pull off the drum, take the 4 torx bolts out of the back of the bearing and pull it out without removing brake parts
Front- $50 Rear- $80 If you do it yourself. It is an easy job. 2 on a scale of 1-10. Front-- remove the wheel,remove the brake hardware,remove the hub bearing. Rear-- remove the wheel,remove the brake drum,remove the hub bearing. You don't need to remove the rear brake hardware. Very simple job...