answersLogoWhite

0


Best Answer

Ok Here is the deal, after making 100's of calls and asking service centers and "professional convertivle repair shops" no one seems to have the answer (or pro's don't want to tell) I tried several adhesives without any luck, and finally something worked 100% and cures in less than five minutes, best of all is inexpensive and it's available at wally world or any hooby or arts and crafts store..........................what is it? !!A HOT GLUE GUN!!.... it bonds glass to canvas, cloth or whatever you want to call the convertible top material like crazy, clean up you may ask? just use a hot air gun and it cleans in an instant I fixed my 1998 corvette soft top for under 20 bucks, I hope this works for you as it worked for me!..........................Joel AKA..MEXSAT

ANSWER

Have a '03 Corvette Convertible and did the following:

1.Clean surface, unlock the top and place a 2" spacer to relieve stress on window interface.

2.Apply thin coat of 3M Glass Primer [08682 or 08681] to the glass area to be glued -10 min dry time.

3.Apply 3/16" bead of 3M Windo-Weld adhesive 10.5 oz tube [08609] over primer - Press the surface of the top around the window to provide a good contact and extrude excess adhesive.

4.Prop up the window from inside the car to provide good contact between the glass and top - this is important. I also placed some Duct Tape in a few locations at the window top interface to assist in holding the top to glass. Cover top to protect from rain - leave top unlocked with spacer.

5. I let it cure for 3 days because of my outdoor weather conditions, but the curing conditions [Temp/RH] can be found on the 3M Web Site.

6. Carefully clean excess adhesive with razor blade.

7. Cost about $25. Materials can be ordered online or at a body shop supplies retailer. A different solution: Not sure if this will improve the answer or not, but I used Goop ($3 at Wal Mart) to reattach the glass window to where the heat seal failed on the canvas top and so far it's holding great.

User Avatar

Wiki User

14y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How do you glue a glass rear window to a convertible fabric top?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

What is the best glue to use on convertible fabric?

Seal-All is very good on fabric that is exposed to weather.


What can you use to re glue the back window on to a fabric convertible top?

I used 1/2" double stick tape that is used to apply body side molding. It worked perfect.


How do you glue a plastic window to a convertible top?

I would use Lexel or Lepage Extreme for that .


How do i repair the convertible top window if it came loose at bottom in a 00' cavalier?

glue it with clear epoxy


How is the power window glass attached to the regulator in the 2000 Toyota Sienna?

its attached with glue.


What will glue glass to vinyl for a Mustang convertible?

PL Premium, available in small tube or caulk style tube in Home Depot.


What glue to glue ribbon to glass?

PVA might work, it's pretty strong. If not then superglue definitely would - don't stick your fingers together!ANS 2 Silicon works best with any fabric to glass.


How do you remove the rear window glass from a 92 silverado?

It's glued in. you'll need to remove the trim around the glass then cut the glue.


How do you get all purpose glue out of fabric?

There are many methods. It depends what glue and what fabric.


How do you fix off track power window for 2001 oldsmobil intrigue?

If the glass has detached from the clips/feet/whatever-you-call-them that hold the window glass to the rest of the assembly, you can re-glue it. You will have to clean off as much of the old glue as possible, then use a glue made specifically windows and situations like this - I think it is urethane based, and should be available at auto parts stores. Do this with the window up, and make sure you have everything in exactly the right place, operating the window to make sure. Once it is in place, leave the window up for at least a day or two to be sure the glue sets properly. A window being "off track" is often a case of the glue that bonds to the the glass simply wearing out over time and with use.


Your power window is off track and fell into the door how do you fix it?

take it to a glass shop, there is a special glue needed


How to replace rear window glass of Honda civic?

The rear window glass on a Honda Civic is held in place by a silicone sealer. Remove the old glass be prying it away from the car. Clean off any residue of the sealant. Properly line up the window and use the silicone sealer to glue to window to the car.