0
You can put less resistance (more load) on the battery with larger wires, but if you exceed a particular current output for a given duration, you will overheat the battery. To safely increase current output, use two batteries connected in parallel.
Wiki User
∙ 14y ago
Wiki User
∙ 14y agoEither you increase the voltage, or you reduce the resistance.
Either you increase the voltage, or you reduce the resistance.
Either you increase the voltage, or you reduce the resistance.
Either you increase the voltage, or you reduce the resistance.
Wiki User
∙ 13y agoIf you need to increase the current flown in the circuit when the voltage supplied is unchanged then you have to reduce the resistance of the circuit...
V = IR
so when V is a constant..
reducing R will increase I
Wiki User
∙ 11y agoTransformers are usually sized to the load. If you need up to 200 amps on the secondary then size the transformer secondary to give you that. By using that 200 amp transformer you can apply many loads until you reach the capacity of the transformer. That is the way that you increase the amperage from the transformer.
AnswerA transformer doesn't increase current. It increases (or decreases) voltage.The secondary current (i.e. the output current) of a transformer is determined by the load, not by the transformer.
However, you need to check whether that the load current is within the rated current of the transformer, otherwise the transformer will overheat. You can do this by dividing the rated apparent power (expressed in volt amperes) of the transformer by its rated secondary voltage.
Wiki User
∙ 13y agoincrease the voltage or reduce the resistance
Wiki User
∙ 12y agoBy increasing the Voltage or Potential difference in the Circuit. and by decreasing the resistance.
I=V/R
ohm's law
Wiki User
∙ 14y agoAmpere = Volt / Ohms, so you either increase the voltage, or reduce the total resistance.
Wiki User
∙ 14y agoEither you increase the voltage, or you reduce the resistance.
Wiki User
∙ 13y agoYou get a higher rated power source.
Add your answer:
Earn +20 pts
Can a voltmeter increase voltage?
No.
How can we increase the strength of an electro magnet?
Increase voltage. Increase the number of windings,
Why is alternating current more effective at long distance travel than direct current?
Transformers increase and decrease voltage as needed. PLATO
Does increasing the voltage to an electric heater increase the amperage it draws?
It will increase the current since the water heater is made of a heating element and which is resistive in nature. Ohms law states that V=IR where V is the voltage, I the current and R the resistance. Now the resistance will always remain constant. Thus, when the voltage is increased, the current will also increase.
What will cause an increase in current flow in a simple series circuit?
Increase current by either increasing the voltage or decreasing the resistance.
What is the effect of surge arrester on increase the voltage in medium voltage circuits?
What is the effect of surge arrested on increase the voltage in medium voltage circuits?
Should you increase voltage or resistance to increase flow in a circuit?
To increase (current) flow in a circuit you increase voltage (or decrease resistance). Ohm's Law: Current = Voltage divided by resistance
Will the resistors ohmic value increase if you increase the voltage?
No.
Can a voltmeter increase its voltage?
no
Can a voltmeter increase voltage?
No.
What is the name of the component that is used to increase or decrease alternating voltage?
A transformer is used to increase or decrease alternating voltage.
What would be the effect of increasing the voltage of the battery?
Ohm's Law states that Voltage = Resistance (Ohms) * Current (Ampere). So when you increase voltage, you increase current.
When voltage increase then current will be?
it depends on what type of load. Motor amperage will drop off as voltage rises. loads such as lights will increase amperage with voltage rise.
Will current increase if the voltage in a circuit is increased?
Ohm's Law states Voltage = Current x Resistance. Hence if voltage is increased and resistance is constant, current will increase proportionally to the rise in voltage.
How can we increase the strength of an electro magnet?
Increase voltage. Increase the number of windings,
When are electromagnets used to increase or decrease the voltage of electric currents?
Electromagnets are never used to increase or decrease the voltage in a circuit. These magnets in conjunction with a rotating device (an armature) can create a voltage but the do not have any effect on a voltage.
What is the fuction of the step-up transformer?
Step-Up Transformers increase the primary voltage to a higher voltage, of same frequency.
