You will probably need a Saab shop manual or at least the wiring diagram. The radio wiring is a little different depending on the model year. You will need to remove the left speaker cover to help with removal and installation. During re-assembly, make sure that the rod between the heater valve and the temperature dial on the dash has not become disconnected.
A special tool is need to unscrew bolts and shifter housing. You will notice the lock barrel is permanently attached to housing. Proceed to remove the center console and shift rod. Remove security nuts, there are three. After removing the housing note there are three long bolts underside. Unscrew them as well, to remove cover. Separate long shift rod from hold, replace shifter housing and return mechanisms.
Don't know can you? I have same car an not one retard knows how at install place. I hooked amp an subs up an use iPod for sound black boy
how do you replace an alternator on an 1999 Saab 9-3
how do i replace the front strut on 1999 Saab 9-3
How do you replace a front indicator bulb in a Saab 93
not possiable as the key is built into the Saab radio DICE which is your radio and your imobiliser ststem
its on the rear of the unit but normally clarion or kenwood
it is a timing change, no need to replace
No, two different radios all together..both have to be programmed to car to work but the 93 radio harness will not mate with the 95
replace alternator Saab 2000 4 cylinder 9-5
Yes, the size is identical.
The best way to do this is to check out the manual. This will list the parts that are needed to do the job right.
The Saab 9-7X was made in the US by GM and the new Saab 9-4X is made in Mexico by GM but is designed by Saab in Sweden. Saabs 9-3 and 9-5 (not SUV) are made in Sweden.
battery for 203-09 SAAB 9-3 is grup 48/6 -750 CCA