It depends on the size of PVC. For smaller PVC you can buy fittings that glue onto the PVC and allow a thread x barb fitting to be installed. For larger pipe you should get a brass compression fitting that clamps down on the PVC and adapts to a thread x barb fitting.
NO - pvc is Polyvinyl chloride, not hgih-density polyethylene
This is not necessarly true. It all depends on which pipe has a higher bar rating, because the higher the rating, the higher the thickness of the pipe. For example a 5 bar PVC pipe is weaker than a 16 bar poly pipe and visa versa.
Yes.
PVC
It depends on where you are application and local code. Copper tube, Pex, PVC, CPVC, & Polyethylene are all used.
You need each piece to have a threaded end fitting, one male, one female.
No, it is not.
They are similar but different. PVC is stronger & more rigid than polyethlene and is used for wastelines & polyethylene is used for water lines.
Install sealtite connector and use PVC FA connector -- threads on one end and coupling on other end to glue to pipe.
PVC pipe fittings are used to connect and join different sections of PVC pipes together. They provide a secure and leak-proof connection, allowing for the smooth flow of liquids or gases through the pipes. These fittings come in various shapes and sizes, such as elbows, tees, couplings, and adapters, and they can be used for a wide range of applications, including plumbing, irrigation, and construction.
I was in the PVC pipe manufacturing business for over 30 years and have never heard of a "1K PVC" pipe. If "1K" means a 1,000 psi pipe, this does not exist as a commercial product. Sorry.
You can not glue brass directly to PVC pipe. Use male/female adapters to join these two materials. ie, a male threaded PVC end fitting glued to the PVC pipe and a female threaded brass fitting screwed onto that.