answersLogoWhite

0


Best Answer

You can't, really.

An automatic Airsoft gun runs on two types of power sources. Electricity and Gas.

Basic Electric Function:

Basically a standard battery will power a simple 2 wire transfer with a fuse that varies. the power will be connected to a motor when the trigger is squeezed, connecting the power source to the motor. there is a plate on most models that controls wether the motor makes one revolution or multiple ones. At the end of the motor is a gear known as the pinion gear. this will spin 3 gears named the spur sector and bevel gear. these gears will pull back teeth on a piston held forward by a spring which is held in place by a spring guide. once the gears pull the piston all the way it releases and shoots into the cylinder compressing air that shoots out of the air nozzle, into the hop up to propel the BB forward.

I am not a specialist by any means in gas guns, but by all means, try this:

The hammer hits a valve releasing a tiny bit of gas. everytime a new BB is chambered, depending on the model but for this I will just refer to a gas blowback M9, the slide goes back. pull the trigger again, release the gas propel the BB forward and chamber a new round. full auto simply allows the slide to move back and forth freely until locked into place by the trigger being disengaged.

User Avatar

Wiki User

13y ago
This answer is:
User Avatar
More answers
User Avatar

Wiki User

9y ago

You will need a lot of money and an engineer. Make that lots and lots and lots of money. Basically, you don't.

....................................

In replica guns the barrel is locked and due to this reason it is non firring. So you have to fix it but this is totally an illegal work which should not be done in any case.

This answer is:
User Avatar

User Avatar

Wiki User

13y ago

You can't! If you want to make a non blowback (NBB) airsoft gun into a blowback (GBB) airsoft gun it's simply like built a GBB from scratch. You need a new slide and body (which means also a new inner and outer barrel, hop up chamber), blowback nozzle set, magazine, etc..... JUST BUY A GBB. It's a lot cheaper.

This answer is:
User Avatar

User Avatar

Wiki User

13y ago

You can't. If you want to make a spring airsoft gun into an electric airsoft gun (AEG) it's simply like built an AEG from scratch. You need a new body (which means also a new inner and outer barrel, hop up chamber, and even the handguard), a whole gearbox, wiring, battery.... JUST BUY AN AEG. It's a lot cheaper.

This answer is:
User Avatar

User Avatar

Frank Ferguson

Lvl 2
2y ago

Easy. You remove the part that's allowing the slide not to go back that is blocking the slide from moving in place . Try see it see if I'm right OK give me a thumbs up if so and you'll see why they call me the scientist

This answer is:
User Avatar

User Avatar

Wiki User

12y ago

You can't. A standard pellet gun barrel is .177 caliber. An airsoft BB is .23622 caliber.

This answer is:
User Avatar

User Avatar

Wiki User

14y ago

you can't, no ones tried yet

This answer is:
User Avatar

User Avatar

Wiki User

14y ago

No

This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How do you make a non blowback airsoft gun a blowback airsoft gun?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

What is the difference between a blowback m16 and a non blowback m16?

There is no difference! A m16 or any other gun must be blowback to work. Are you talking about airsoft or something, it does not matter. So a real m16 is already blowback, cant change that! and if your talking about airsoft it does not matter


What store can you find a Y and P M9 Airsoft Gas Non-Blowback pistol?

shortyusa.com and airsoftpost.com


How much is an airsoft gun cost?

The pistol is only about 15.99 but the AK airsoft gun is 54.99 the AK has more damge in to it but if You want alot of alot of damge get a BB gun they are metal and hurts alot more. the cost 20.00


Should you get a blowback airsoft pistol or a non-blowback?

Blowback pistols are obviously more expensive than non-blowback pistols. On the other hand non-blowback pistols generally have a higher fps and are alot cheaper. It seems that they can use CO2 with less damage or wear and tear to the gun. They seem harder to clean and it seems as though alot of them have internal magazines which are a bit annoying to load. Blowback pistols are obviously easier to load and easier to clean, however it seems as though alot of guns have atleast one problem. That problem could be with a leaking or a slide that doesn't go back all the way. Blowback pistols ALWAYS seem like they have a leaky mag problem and are gas whores, while non-blowback pistols are extremely gas efficient and there mags never leak.


What is a nonblowback airsoft gun?

blowback is when the bolt of the rifle, ( the thing that pushes the ball out of the barrel and at your opponent or target) blows back, or the slide on the pistol goes back, after every shot. usually its gas or electric guns, never spring action guns. non-blowback does not have this feature, without it it is much less realistic, and less cool. but when using rifles or SMGs, it doesn't exactly matter. but it does make it look cool.


Is it legal to own a non-see through airsoft gun in Canada?

Yes, as long as you have the orange tip, you can have an airsoft gun. Otherwise the police could mistake it for a real gun and you could end up in jail or worse.


How do you silence a spring airsoft gun?

You would have to purchase a silencer for your pistolPlease check out www.airsplat.comhttp://www.airsplat.com/Items/AC-UP-SCP-SH001.htm#STS=fzhj4y8j.1lfeFull METAL Universal Silencer with 4 adaptersWill fit almost any spring airsoft gun and Gas Airsoft Non-Blowback Guns: i.e. P99, M92 / Elite / Compensated, USP, G26, P226, P228, P229, etc.You can't really silence a spring airsoft pistol, this above person just wants you to spend money on something that will LOOK like a silencer but not really silence it. CO2 is a different story, you would have to make one of those.DONT SHOOT IT!


Is an airsoft gun and a bb gun legally considered the same in tx?

They are both considered non-firearms and would fall under "air rifles"


Is there a airsoft gun that is automatic and not electric?

Usually, the only non electric rifle this is also automatic will be CO2 powered.


How many shots can you get from a CO2 cartridge in a air soft gun?

When using CO2 there is no set number of shots due to the spiratic nature when releasing the CO2 from the tank. CO2 is unreliable in the fact that the psi of the shots are not consistent and tend to waver and vary depending on temperature. However estimates can be made from the size and past records. 12g- 30-35 9oz- 300-500 12oz- 700-900 20 oz- 800-1000 24 oz. 1000-1100


What sport is AirSplat associated with?

AirSplat is one of the larger retailers for AirSoft guns. AirSoft is a sport where one uses a replica of an actual gun that shoots non lethal plastic pellets.


What airsoft gun is 400 fps and under 50?

The M14 at Hobby Tron is only 36 buck s and shoots at 390 fps. i was thinking of getting that one with a scope cuz it doesnt come with one. its spring though so u dont have to charge battery or buy gas. they are really reliable. --- I wouldn't buy from hobbytron, they're site is so horrible. My gun from there didn't work and they wouldn't take it back. Try hitguns.com --- Off of Evike.com there is a CO2 powered 1911 non blowback airsoft pistol for only 39.99 and the fps is 370-500 i own this gun and i love it. Its (verrry) powerful and accurate.