Consider a rectangular shape. A traverse would set up an instrument at one corner and then measure the angle between the two other adjacent corners of the rectangle. In this case 90 degrees. The survey also measures the distance along one of those adjacent sides. Usually angles are measured in a clockwise direction and the right side length would be measured.
The instrument is then moved to the corner you just measured the distance to and the procedure is repeated (clockwise angle and distance to next corner). Move to the third corner and repeat the procedure. Move to the fourth corner and repeat.
You have now measured four angles and four distances. If you did it right, the four angles should total 360 degrees. This is a math rule for any four sided figure.
In a real survey, the instrument would also be used to measure the angle from the last corner (back sight) to any points of interest such as boundary marker, building corner, etc. With trigonometry, the traverse is adjusted and then the x,y coordinates for each point of interest can be determined.
Traverse surveying is a method that is used to establish control networks in the surveying field. This method of surveying involves placing survey stations along a path of travel.
Advantages of Traverse Surveying: Traverse surveying creates a closed loop, which confirms the accuracy of the survey. It is suitable for surveying large areas with a minimum of time and effort. This method can be used for both plane and geodetic surveying. It is easy to calculate the coordinates and areas by using the traverse surveying method. Disadvantages of Traverse Surveying: The accuracy of the survey is dependent upon the accuracy of the instruments used for the measurements. This method requires a long base line which is not always available in certain circumstances. Traverse surveying is not suitable for rough terrain as measurements can be affected by uneven ground. It is difficult to locate the exact points when the measurements are taken from a long distance.
Henry Louis has written: 'Traverse tables with an introductory chapter on co-ordinate surveying' -- subject(s): Accessible book, Tables, Surveying 'Metallurgy of tin' -- subject(s): Metallurgy, Tin 'Traverse tables' -- subject(s): Surveying, Tables, Traverse-tables 'The preparation of coal for the market' -- subject(s): Coal preparation
With transverse in surveying civil engineering, less organization and reconnaissance are needed. This method of surveying is used to establish the control network.
The University of Florida offers classes in land surveying.
Land surveying is mapping out land for land development. Hydrographic surveying is mapping bodies of water. Engineering is a type of surveying that has to do with buildings roads and other man made things.
polar
Charles A. Mourhess has written: 'Precise traverse and triangulation in Indiana' -- subject(s): Traverses (Surveying)
geomatics differ with surveying in that it encompasses a broad range of disciplines than surveying,let alone surveying is a discipline under geomatics
This process is known as surveying.
General classifications of surveying include geodetic surveying, plane surveying, topographic surveying, cadastral surveying, construction surveying, and hydrographic surveying. Geodetic surveying deals with large-scale measurements of the earth's surface, while plane surveying focuses on small-scale measurements on a flat surface. Topographic surveying involves mapping of the land's natural features, cadastral surveying deals with land parcel boundaries, construction surveying is used for building projects, and hydrographic surveying is for mapping bodies of water and their features.
The common term for measuring land is surveying.