To program your remote you have to search for the local channels in your area.
Digital Stream converter box remote code: Philips Universal Remote works on '1776'
how to program a universal rca remote to a dtv craig converter box
You can still program the remote with the converter box off if you know the code. Then Use it to turn the converter on.
It would depend on the brand of remote that is being used. Just look at the instructions that come with the remote to find out how to properly set it up.
remotes that are built for cable boxes like the cox remote is a universal remote control. although this is a universal remote, it normally will only work with cox digital converter cable boxes. therefore if the digital converter box that you want to control is from cox or motorola (or similar supported affiliate of cox) then pressing the CABLE button will control that said digital converter box. The AUX button will normally not control another digital cable box, because the manufacturer figures that the only converter STB that you will be using is theirs. thus, the CABLE button is only set for their STB. Normally to control weird or unpopular digital converter boxes - universal remotes are recommended. there are many brands, but make sure you find a learning universal remote. so in case the digital converter box code is not in the universal remote (like in the cox universal remote) then you can program it in yourself - hence the term "learning remote" i picked up a ton of these last year for christmas for everyone in my family because they were dirt cheap and most ppl watch tv. so a universal learning remote for everyone was convenient & cost efficient for the state of the economy last year. i posted a link of where i got mine from, but there are many on the market. find what you like & purchase it, but make sure its a learning universal remote.
how to program a universal rca remote to a dtv craig converter box
Walmart is offering an number of replacement universal remote controls that may be programed(by entering the correct code into the remote) that will operate an large variety of manufacters digital converter boxes.So, the answer to the question is yes.
The code is 911 (not a joke)
I used 067 for a Jumbo Universal Remote...you could try that.
No
You can program your GE universal remote, to your converter box, by holding the power button in until the auxiliary read lights aluminate red. Select auxiliary and input the proper code.
In programming a ds converter using an RCA universal remote, it is necessary to find the code for the remote. This can be done by turning devices on and pressing search. It will rotate through and stop when the successful setting has been reached. Switch to each additional device that needs to be connected on the remote and perform the same function. This will program all devices to work off the universal remote.