BC 560XLT 16-Channel Direct Entry Programmable Scanner
PROGRAMMING CHANNELS
1. Turn on your scanner by turning the volume clockwise.
2. The scanner might strart scanning. If so, press MANUAL to stop the
scanning.
3. Enter the channel number that you want to program and press MANUAL.
4. Enter a frequency including the decimal point. The decimal point shows
up on the display as a -- (dash).
5. Press Enter to store the frequency.
6. To confirm the proper entry, press REVIEW. The programmed frequency
appears on the display one digit at a time.
7. To program more channels repeat steps 3-4.
How do I program
easy to program
Scanner codes
Try programing in 000.000, if that does not work then you can just lock the frequency out or program over it.
Follow the link to download/print the manual for your scanner. It will walk you through the programming process. http://www.uniden.com/pdf/BC72XLTom.pdf
You don't. The good news, though, is that all Uniden/Bear at scanners in the 14X series are nearly identical in features and operation, so you can follow the link below to download/print the manual for the BC148XLT: http://www.radiopics.com/1.%20Manuals/Bearcat/Bearcat%20BC148XLT%20%28Manual%29.pdf Bill B
it takes a 8 digit number example 1550.0100 palestine Texas
See the related link below for Jasper County, Texas.
INPUT: AC 120V 60Hz OUTPUT: DC 12V 200mA
go to marksscanner
you don't , it's programed with freqsProgramming BC350C scannerPlease reference the link below. Programming the scanner begins on page 24. The link provides a page that allows you to view it in .pdf format.
Many owner's manuals are listed on the Uniden website which can be accessed through the link provided below in the Related Links section. Not all owner's manuals are listed. Some older models may require a bit of work to find depending on what model you are looking for.
When you set up a Uniden Bearcat BC148XLT base scanner, you must program the frequencies you want to scan based on your area's frequencies. You do not need to include weather frequencies, because the BC148XLT includes weather frequencies pre-programmed in the base. You can add frequencies to your scanner in minutes, allowing you to customize the frequencies you scan.Press "Manual" to stop the scanning process. Press the number for the channel you want to program using the keypad on the scanner base. Press "Manual" after the channel number.Enter the frequency, including the decimals, using the buttons on the keypad.Press "E" to store the frequency.