Try code 522 for RCA DVD players. Universal doesn't have a listing for RCA DVD players in its manual for the URC-R6.
YOu must program it as a Toshiba DVD using the AUX button on remote control and the codes 0695 (which worked for me) or 0503, or 1045.Then seperately set up the volume by changing the volume control lock according to directions. FYI... Comcast could not help at all!______________________________________________________That was a helpful answer, thanks.Additionally, based on my own experience a couple of minutes ago, I was able to program the Comcast remote for the Toshiba TV/DVD combo (Tosh model MD19N1, fyi) by using the AUX button & treating the TV/DVD combo as a DVD, as the answer above suggested. But the code that worked for me was the Toshiba DVD code listed in the Comcast remote pamphlet (specifically, code #20695), rather than the codes stated above. But the answer, above, to use the AUX button & treat the TV/DVD combo as a DVD is what set me on the road to being able to program the remote. Also, the answer suggested above about programming the volume for the remote, by just following the Comcast remote instructions for "unlocking" the volume was exactly right. Also, fyi, none of this programming of the Comcast remote messed up TV/DVD operation by the original remote I have for the TV/DVD. I just didn't want to have to be juggling two remotes all the time.Thanks alot for that answer above. (11/5/10)
Press the Stop button on the remote control and at the same time press the Stop button on the DVD player itself for 10 seconds.
You cannot control your Sony Receiver with your Sharp TV remote. Sharp remotes can control many brands of DVD and Blu-Ray players, but only Sharp receivers. You should program your Sony receiver's remote to control your TV instead. How you do this is outlined in your owners' manual.
Only certain models of Aquos TV's have programmable remotes. If yours does, code 26 is used for Toshiba DVD players. Press the DVD-VCR and Display buttons at the same time, and then press 2 and then 6.
I want to tell you what just worked for me... 1. Turn the component on that you want to program 2. Press and hold that component key (TV, VCR/DVD, or SAT/CBL) on your remote 3.Press ON/OFF button until your unit turns off. 4. Press Stop button to program the "code" that you remote found to work your component.
How to program a DVD player with a Toshiba Television
You can probably program your Comcast remote to work with it just fine.
Contact your remote control manufacturer customer service team
There are a few different DISH Network remote codes that you can try for your Samsung DVD player & one should successfully program your remote, 591, 738, or 517.
What are the codes to program a zenith mbr3455 universal remote for a zenith DVD player
no the remote has to come with the porable DVD player
Super Scan TV's are a DVD based TV/DVd player and vhs player. So to program the remote control for such a tv would be under DVD: super scan.
Most, if not all Dvd players for the car have a remote.
Check Sharp's website for the model of the TV you are using. They will have an instruction manual for your model that you can download. Located near the back will be the programming instructions and all the codes for major brands.
The codes for a JWIN DVD Player are 0390,0893,0895, and 1108. These codes are universal and should work with any remote that is compatible with your DVD player.
Yes, the DVD-V9800 DVD/VCR player includes a remote control, which can be programmed to control other Samsung devices as well.
You can't. it's not possible to program a LG remote control. The buttons are there to fool you.