We tried and tried to do it by the instructions that came with the remote, but we just couldn't get it programmed.
Then, on the web, we read instructions from a user which allowed us to program it, and it was much easier.
Start with the appliance (TV, VCR) off and turn on.
1. Press the appliance button (TV, VCR) and the ON/OFF button, holding them down until the ON/OFF button lights up. Release the buttons and the ON/OFF button should stay lit.
2. Then press the play button every couple of seconds until the appliance turns off.
3. Then press the REVERSE button every couple of seconds until the appliance turns on.
4. Then press STOP (on the bottom) to save the programming.
5. UREKA!
****THIS IS THE EASIEST AND BEST TIMESAVER!! Thank you!!
I have an RCA DVD Recorder, model DRC-8310 that includes this remote control. I am including a link here that will take you to a site that has an Adobe PDF format user's manual for the DRC-8310. I am also including a link from my website as well. We will have to see whose remains available for the longest time.
The manual contains a chart of the device codes the remote control understands, instructions on how to program the AUX button for other devices, volume punch-through and more, as well as instructions on the 2 modes of programming; Direct Entry and Automatic Search modes. Link provided by RCA (Link to a 3rd party document archival site):
http://157.254.235.130/public/DRC8310_IB.pdf Link from my website:
http://www.icsaz.com/Files/RCA_DVD_Recorder_Model_DRC8310_User_Manual.pdf Any questions you might have can be answered simply by accessing email support via my website.
1. Turn on TV 2. Press and hold CODE SEARCH until light stays lit, release 3. Press TV button 4. Press POWER repeatedly (slowly) until TV turns off 5. Press ENTER (repeat for VCR & Cable)
To program the RCA RCR314WR Remote Control, use either the Direct code entry, Auto code search, the Brand code search, or the Manual code search.
how to program my tv with the RCA D 770 - universal remote control which has no code search button
how to program a universal rca remote to a dtv craig converter box
Go to the website that is in the related links column.
i have a rca remote without any light, have a quasar tv, how do i make this work?
for westinghouse 1000, 1001, 1190, 1191
This model was sold with many RCA TV's. Retrevo has a manual for an RCA RBA29550 that uses this remote. Jump to page 8 to see how to program it.
The best thing to do to program your RCA remote is to follow the directions you were given when you purchased it. Each universal remote is slightly different, so your best bet would be to follow the instructions you were given at time of purchase.
rca universal control
In programming a ds converter using an RCA universal remote, it is necessary to find the code for the remote. This can be done by turning devices on and pressing search. It will rotate through and stop when the successful setting has been reached. Switch to each additional device that needs to be connected on the remote and perform the same function. This will program all devices to work off the universal remote.
how do i program a charter remote to a rca tv
how to program a universal rca remote to a dtv craig converter box
Try code 522 for RCA DVD players. Universal doesn't have a listing for RCA DVD players in its manual for the URC-R6.