Step 1: Open the glove box
Step 2: Remove the "carbon fiber" strip starting under the glove box (it's just clipped in)
Step 3: Unplug battery so you don't harm anything electronically
Step 4: Remove the two screws at the left and right of the display
Step 5: Put fingers in square spaces next to where the bolts where and pull...
Step 6: Done. Repeat steps backwards to reassemble
how to remove console 2006 ford 500
just remove it and there you go it's out
Passenger side, below the glove box on the center console. There is a small panel hiding it.
hammer and strength
It is bolted to the floor under the center console.It is bolted to the floor under the center console.
It's in the center console of the vehicle... or arm rest.
Under the center console, between the front seats.
The 2006 Honda Civic OBD 2 port is under driver side dash next to center console
Center console, should be just below the upper air vents.
yes, it is inside the center console between the driver and passenger seats
http://www.fordfusionclub.com/index.php?topic=152521.0 This site has a great review about how to do this.
remove the two light lens be careful not to break them. then remove the two torx screws behind the lens. give a slight pull down on the front of the console to remove the two clips and you are done.