To remove door panel you will need a door panel tool or a paint scrapper like tool. You will have to remove some screws around door handle and so. Then you will need to remove door panel by prying door loss around the edges of the door panel. When done with the repairs or anything your doing after removing door panel. Then the door push-pins are supposed to be on the door panel. When ready to install those push-pins are inserted inside the door holes. Push them in until you hear a click. After that reinstall the door handle and screws. exc.
Remove center stack bezel (radio, heater control), remove screws from instrument trim panel at ctr stack and remove instrument trim panel, remove dash top panel, replace speakers.
Well the door speakers are 6x8. You will need to remove the Door Panels Removal & Installation 1. Remove the sail panel (Front Doors Only). 2. Remove the door panel by carefully lifting the panel upward to release the retaining clips. 3. Remove the electrical plugs that control the windows, exc. The installation is the reverse of the removal.
To replace the back speakers in a 2006 Acura TL, remove the SRS housing on both sides and the back panel of the speakers. Remove all wiring attached to the speakers and replace.
Front speakers are in the door. remove screws on the door panel, then remove the panel and you'll see the speaker
Remove door panel, remove 4 screws, remove speaker, put new speaker in, replace screws, replace door panel. Done.
you have to remove the door panel
In order to replace the speakers you have to flip down the rear seats and look at the screw ports and remove all the screws to remove the panel covering the speakers. The rest is self explanatory.
Remove the Door Panels and remove screws holding the speakers. Door Panels Removal & Installation 1. Remove the sail panel (Front Doors Only). (Triangle looking shape near the side view mirror) 2. Remove the door panel by carefully lifting the panel upward to release the retaining clips. 3. Remove the electrical plugs that control the windows, exc.The installation is the reverse of the removal.
You have to remove the door panel, after that you will be able to replace the speaker.
Yes the door panel must be removed to gain access to the speakers. Just replace them It will sound better.
power door or manual
link here: http://www.craigcentral.com/durango/speakers.asp