remove the screws that are around the side and bottom of panel.
remove covers located by mirror and by the door hinge. remove the screws you found
use a small bent screw driver and put it in the hole on the underside of the the close handle to push the cover off the handle. remove these two screws
remove the screw behind the door open handle.
pop off the cover that is over the mirror mechinism.
now pull up on the panel and voila!
yes?
Usually located behind the driver's door panel. Remove inside door panel for access
remove drivers inside door panel and there are 2 or 3 bolts that hold mirror on from the inside after you diconnect the wire harness if it is a power mirror
how to remove the vent from dashboard of 1996 ford contour
How do you remove the inside driver's door panel on a 2000 Volvo S40?
Try the right side of the dash when you open the passenger door. There may be a panel you can remove and hit the reset as is the case on many fords ------------------------------------------------------------------------------------------------- On a 2000 Ford Contour the fuel pump shut off switch ( inertia switch ) is in the drivers footwell , by the drivers left foot , behind the kick panel ( there is an access hole in the kick panel )
the fuse panel is on the end of drivers side dash. remove the panel, there should be a card inside
remove drivers inside door panel and there are 2 or 3 bolts that hold mirror on from the inside after you diconnect the wire harness if it is a power mirror
The drivers door panel has 12 retaining clips. Pry outward on each clip, one at a time. Remove the inside door handle retaining screws.
On a 1998 Ford Contour : The fuel pump shut off switch ( inertia switch ) is located in the drivers footwell behind the kick panel . There is an access hole through the panel ( it's near the inside hood release )
TAke off the window regulator handle and door handle then remove all of the screws you can find at the corners etc then remove the retainers around the sides and bottom of the panel. This requires a special tool availavle at parts stores.
In the drivers footwell , behind the kick panel ( there is an access hole in the kick panel )