the easy way is to un clip the seat the clip is located under the front seat cushion by filcking the wire clip back its a wire clip lift cushion off then there are four bolts which unbolts seat to frame you will need to unplug wiring for seat motor you will see when you remove cushion then lift seat out
there are four bolts then the top will pick straight off
To remove the seats from a 1995 Corvette, you will need to remove the front and rear nuts from the seat frame studs. You will?æalso need to remove the lug wrench that is attached to the seat frame studs.
Go on over to Smokinvette.com and in the C4 technical section you can find a diagram on this procedure! Good luck!
== ==
Remove four bolts. Lift it out.
Taking the seat out of the car first is going to make it 100 times easier. From there it is pretty straight forward as you will see the bolts that need to come off to remove the motor! Feel free to jump on over to Smokinvette.com and get some more detailed pics of the process!
Take a jump over to Smokinvette.com and click on the C4 technical section and you will see the thread with detailed instructions on this. Good luck!
"Corvette Mike" over at Smokinvette.com knows just about everything you can imagine about C4 Corvettes! Good luck!
Should be a bolt in each corner of the seat and disconnect wiring harness
Once again, seeing that I don't know a whole lot on the C4 Corvette I would ask this question in the C4 technical section on Smokinvette.com and get a dead on answer! Good luck!
230
I don't own a C4, however there are detailed directions on how to do this at Smokinvette.com and with pics too! So it is really laid out to make it an easy job. Are you changing the cheap plastic gears? A ton of C4 owners have and put in the brass gears. Good luck.