you have to replace the whole panel it is all electronic you should have know problem finding one cheep because several different cars will fit
It is not possible to fix a broken needle. You must remove the broken one and replace with a new needle.
You have to take the dashboard off
How do you fix a broken ball pump needle
If the needle is out you have to replace the needle itself as its an LED light. If its a dashboard light then you have to remove the face plate(two screws on the top of it) and take out the instrument cluster, take it apart and replace the bulb. Although the needles are engineered to be removed/replaced, you cannot buy a single needle. You must by the entire instrument cluster to fix this.
In some cases you can use a magnet to pull out the broken key. You might be able to pull the broken key out with a needle nose pliers. You might need to replace the ignition barrel.
you need to see your local Dr. but if you cant then if the end of the needle is protruding you have to disinfect the area and then remove with tweezers. best bet though see you doctor a broken needle can cause a lot of problems.
If you search the Internet (I prefer google) for "broken odometer" or some such keyword(s) - you will find your answer(s). But basically, you have two options, find a similar car/odometer at a junkyard, and replace the broken one with one that's working from there.... Or, take it (or send it....) to a speedometer shop which will be able to reconfigure the speedometer. Option 3, I found a high-tech site that details removing the dashboard, removing the speedometer from the dashboard, opening up the speedometer, replacing a broken gear in there (if it's a mechanical speedometer), then basically putting it back together in reverse. Sounded kinda technical, cause you gotta be sooo careful not to move/nudge the numbers the wrong way, or bend the odometer needle when putting it back onto the shaft.
what should the needle be on - on dashboard for the battery
Try removing your pins as the fabric feeds through the machine. If your needle hits the pins it may break.
needle nose plyers
I have the same car you need to replace both the sensors which are on the engine they screw into it or replace the water pump but it sound like a sensor is messed up that all the part is about $15 dollars
TO REMOVE A BROKEN DIP STICK USE NEEDLE NOSE PLIERS OR A MAGNET.