you gotta pull off the knuckle, and have the bearing pressed out, and a new one pressed in
you need to press out the bearing inside the hub assembly.
Make sure it isn't the tire first. You will have to remove the strut, and have the bearing pressed out.
You have to pull off the front bumper 1st. Then after you pull off the front bumper, then you have to disconnect the whole light from the car. After that you can replace the bulb.
No, you need a press to remove and install the bearing.
sounds like a bad wheel bearing, on the right front. this is a common symptom on most any front drive car, the hub and bearing are a one piece unit.
take it to a shop its behind the timing belt cover you have to take every thing off the front of the engine including the motor mount!!!
a garage is probably going to charge you 2 hours of labor plus the parts
how to replace front wheel bearing on 1996 Hyundai elentra
You can replace the front bearing on 2003 Citroen Relay using air tools.
you cant
passenger side front by windshied washer reservoir
you can replace it by taking it to the shop and they will do it for you.