we are a well known swimming pool construction and renovation company in southport, nc. we'd be happy to help but would need much more information in order to help you. but generally what you are describing is a project that does not lend itself very well to do-it-yourself fixes. it is heavy and tedious requiring machinery and a degree of expertise to pull off a repair renovation. contact us anytime. we'll try to help. 910-457-9145
YES.
To replace the axle on a 1993 Honda Civic the axle nut has to come off. The hub assembly also will need to be pulled back so the axle can be pulled from the transmission.
That would depend on the make / model of the vehicle.
They are usually easy to replace. some just slide out when pulled while other may be screwed or bolted in which are still easy to remove with tools.
if the engine is the same as you pulled out then yes it will fit there is a slight difference between engines if you pull a 2 0 replace it with the same if the engine is the same as you pulled out then yes it will fit there is a slight difference between engines if you pull a 2 0 replace it with the same
you replace the spring inside the gas cap that pushes the door open
Open the hood. On the headlight housing you will see a locking cam. Depress and release. The whole assy will be pulled from the front of the car. Once out you will see how to replace the bulb(s)
you will have to have the axle pulled at a shop.the bearing slides along the axle shaft and seats in the axle housing.
The lighter module on a Pontiac Bonneville can be removed by unscrewing the mounting hardware. The lighter will then be able to be pulled off the center console.
lever pulled out, having trouble getting the lever locked back in place
My 96 Ford Taurus gl OHV had 2 when I pulled the exhaust off to replace the tyranny.
Check all your accessories pulled by the belt. There are a lot of bearings in these accessories that can cause the " chirping noise".