Just did mine today. Too about an hour. Pretty straight forwar and no special tools require. Will provide photos later.
You need to turn the automatic(spring loaded) tensioner to release pressure on the belt... the library may have a manual for the details free dave
If the tensioner isn't tight enough it's probably the spring. You can purchase a serpentine belt tensioner to replace the one that has become weak.
Loosen the tension on the 95 Buick Park Ave belt by moving the belt tensioner to one side. Using a socket and ratchet on the tensioner pulley, pull to the side an remove the belt. Install the new belt an release the tensioner to hold the belt into place.
I have used a socket with a ratchet handle. The ratchet will allow you to get more travel to move the pulley and get the belt off.
I need to know how do i replace a haeter core on a 1994 buick park avenue?
replace tension put it on
how to replace AC compressor on a 97 Buick park Ave
Remove belt and tensioner should just be bolted to engine
put a wrench on the tensioner pully and pull it to release tension on the belt
The PCV valve on a 1995 Buick Park Avenue is located on the top of the valve cover. Twist the valve and pull to remove and replace it.
You should not have to remove any brackets to do this. Near the top of the belt run is a pulley on a spring loaded belt tensioner; insert a ratchet or use a wrench to release the spring tension and the belt will come off.
I have a '92 PA Ultra. The Ultra has the supercharger. There are two sets of serpentine belts for this configuration.