if it's the same as a 98 then all you need to do is find the power cords running to the back of your headlight assembly and turn the attachment left about a 1/4 turm. That will free up the cable allowing you to remove the bulb. Make sure you don't touch the new bulb with your fingers, the oil from your skin will shorten the life of the bulb. I installed mine using a paper towel but I've seen recommendations to use rubber gloves.
A 2001 Chrysler Sebring does not have a cabin filter.
go under hood reach down where headlight is turn the light counterclock wise and pull bulb out then twist bulb and it will come out.
Chrysler sebring ignition damage by thief key doesn't work how do you replace?"
No, the 3.2L will not fit a Sebring.
A 2002 Chrysler Sebring has an overhead cam engine. That means it does not have push rods.
60.00 $
2004 Chrysler Sebring headlight bulb replacement: Purchase the correct replacement headlight bulb(s) first, before disassembling the vehicle. See sources and related links below for replacement bulb information. Then consult your owner's manual for the headlight bulb replacement procedure. As simple as it sounds, the owner's manual is the best place to start for bulb replacement instructions and illustrations. You may want to consider replacing both left and right at the same time in order to keep brightness and color equal (optional).
You have to remove the entire head light assy. 2 or 3 screws located right above the light. If you have the owner's manual, consult it while doing the above. See sources and related links below for bulb information.
Replace the crank sensor located on bell housing of trans.
That'll be a bulb from inside the engine compartment, behind the lamp.
It will cost between $300.00 to $500.00 to replace the rack and pinion on a 1996 Chrysler Sebring. This cost includes labor and parts.
It would be very expensive considering that car doesn't have a carburetor.