answersLogoWhite

0


Best Answer

There should be a routing diagram under the hood. If not, take a digital picture of it before removal. Pry the idler pulley back and the belt slips right off.

User Avatar

Wiki User

17y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How do you replace the serpentine belt on a Ford E150 Van 1995 4.9 no AC 6cly does someone have a routing diagram?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

Does anyone have a routing diagram for the serpentine belt on a 1997 C230?

http://search.express.ebay.com/items/mercedes-benz-manual_W0QQ_nkwZmercedesQ20benzQ20manualQQtrZQQruZ Here is a picture of the engine and it shows most of the routing hope this helps someone. I had to do a little creative problem solving to find it!


How do I find the Serpentine Belt Routing Diagram for 1997-2005 Chevy Malibu V6 3.1L with air conditioning?

I know that on my neighbor's '98 Malibu, there is a diagram under the hood, right next to the serpentine belt assembly. On my '97, it looks like there was one, but it must have come off. With so many Malibus on the road, just ask someone if they will pop their hood for you.


How do you put a serpentine belt fan on a 1995 Buick Riviera?

get someone that knows what they are doing, to replace it the 2 long front engine mount bolts need to be removed to replace serpentine belt


Belt diagram for a 1990 Jeep Cherokee?

The diagram for replacing a serpentine belt for the 1991 Jeep Cherokee Laredo is located on the front of the vehicle inside the engine compartment. You can also find this diagram in the Chilton's manual for this vehicle.


Where can someone go to purchase serpentine belts?

Serpentine belts for cars may be purchased from auto parts stores like Auto Zone, while serpentine belts for vacuum cleaners may be found at stores like Bed Bath & Beyond. Businesses that service vehicles, such as Express Lube and Chicagoland Jiffy Lube, may also replace old serpentine belts.


Can you recommend someone in the Tri-City Michigan area to replace a serpentine belt on a 2001 Chevy Malibu LS?

call 989-482-7376 ask for mr. hankins he has the answer


How do you replace a serpentine belt for a 1997 Oldsmobile 88?

you havee to remove the lower bolt on the motor mount to get enough clearance to slide it through take it to someone its faster and easier that way


Where can you get a diagram of the oil line routing for a 1980 sportster?

You could check your local library for a Chilton's Manual. Or you may be able to ask someone on a site like Craigslist or even a Harley Forum Site. Good Luck!


Where can someone find step by step instructions to replace serpentine belt on a 1996 Nissan 200SX 1.6L?

The instructions are in the repair manual for that car. You can purchase one at most auto parts stores.


How do you replace a serpentine belt on a 1997 Jeep Wrangler?

Loosen the bolts on the alternator (do not take them all the way out), push the alternator toward the engine a little, take off the belt, (make sure you draw the path of the belt first) install the new belt according to the serpentine belt path diagram, and pull the alternator away from the engine (you may need a iron bar to help you be careful not to damage the alternator) and have someone else tighten the bolts of the alternator while you put tension on the alternator to tighten the belt.


How can you get the belt routing diagram for a 2000 Jeep Grand Cherokee Laredo 6 cl 4l?

The serpentine belt routing SHOULD be posted either on the underside of the hood or right on the emissions sticker on the cross member right above the radiator ( this is the normal location for all Chrysler built products. If it isn't in either place the engine was swapped out from an eight cylinder to the six or someone removed the sticker. If this is the case you should try to see if you can get the correct sticker for the engine from the dealer as it contains other vital information. Barring that any Chiltons or Haynes manual covering that year engine will have the correct routing. IF you are mechanically inclined, it isn't hard to figure out the routing as the belt is a specific length for the engine year and size. Smooth pulleys and idlers ride on the back of the belt, ribbed ride on the inside, start with it around the crank pulley and work up from there.


What is the Routing number of al rajhi bank?

I dont know can you give me a routing number