answersLogoWhite

0


Best Answer

to replace the solenoid on a 93 Chrysler concorde you must first purchase the cylinoide assembly from your local advanced autos for autozone I found it it advanced autos for 158 dollars at autozone it is 358 you must take off the pain in the underneath of the transmission there is 13 bolts on those pan b sure to have a drain pan to collect all the Transmission Fluid then you must to remove the filter for this you will need a star key go bolts on the pan are 10 millimeter in the bolts underneath is also 10 millimeter after you remove the filter then you must to remove the transform plate the transfer plate has multiple bolts in it you must remove them all b sure to unclip the electrical harness on the exterior of the transmission into the selenoid then after you take out all the bolts on the transfer plate easily slide the selenoid out on the right hand passenger side replaced with a new cell annoyed that you purchased and begin to both it all back together b sure not to mix up the bolts with the screw heads into which holes they go to in to the transfer plate b sure to place a new filter and it's over in net under the transfer plate then the bolt all the bolts back onto the pan with a new gasket in between the panda in the transmission then fill it all back up with you transmission fluid or you can we use your old 1 just as long as you filter it out with no thing in it b sure that the gasket is tighten upon each side slowly be careful with that gasket so you do not have a leak and this is how you change a cylinoide for a 93 crash for concord

User Avatar

Wiki User

11y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How do you replace the solenoid in a 1993 Concorde?
Write your answer...
Submit
Still have questions?
magnify glass
imp